Margus Posted March 10, 2017 Share Posted March 10, 2017 Why are you doing something like this? Defeats the purpose of HQPlayer... Those files are from "pre-HQP era" HQP@i5/Kubuntu16.04.2 --> switch@home network -> NAA@NUC/Ubuntu server -> DIY DSC-1 -> DSD256 Link to comment
mirekti Posted March 10, 2017 Share Posted March 10, 2017 Hope this helps - listen before you buy if possible Yes, I am starting without the graphic card. I also read many threads and so some Miska's results, however, I am not able to grasp how much means good, only that more means better. For example, if I new my CPU will be at 60% while doing conversion and adding 1050 Ti would offload it by 20% this would make sense. If, on the other hand, 1050 Ti reduces CPU load from 60% to 55%, then there's not much sense in adding the GPU. PS My CPU load numbers are randomly picked (just to avoid confusion). Vinnie Rossi LIO (AVC/Tubestage, AMP Module with built in HPF 100Hz 24dB/octave, DAC 2.0), Harbeth P3ESR, Rythmik F8 Win10 i7-7700 -> Roon -> HQPlayer DSD512- > LIO 100Hz HPF -> Harbeth P3ESR ->LIO -> miniDSP <100Hz -> Rythmik F8 Link to comment
Theobetley Posted March 11, 2017 Share Posted March 11, 2017 I was using HQP 3.14 till this am but HQP started shutting down for no reason running dsd, 24/176 files (no upsampling). So I d/ed 3.15 and still got same response on hirez stuff. Puzzled? Running 16/44 no problem. Update 1: when I change from raw dsd to upsample to 5.644M no problem. Only running raw dsd is a problem. 24/176 seems to be ok with no upsampling. Update 2: I ran 2 x dsf rate for 15 minutes before HQP stopped. So problem seems to be in DSF. Link to comment
Theobetley Posted March 11, 2017 Share Posted March 11, 2017 I was using HQP 3.14 till this am but HQP started shutting down for no reason running dsd, 24/176 files (no upsampling). So I d/ed 3.15 and still got same response on hirez stuff. Puzzled? Running 16/44 no problem. Update 1: when I change from raw dsd to upsample to 5.644M no problem. Only running raw dsd is a problem. 24/176 seems to be ok with no upsampling. Update 2: I ran 2 x dsf rate for 15 minutes before HQP stopped. So problem seems to be in DSF. Now I cant run anything not even 16/44 no upsampling. 2017/03/11 06:39:51 Starting... 2017/03/11 06:39:51 Signalyst HQPlayer Desktop v3.15.1 2017/03/11 06:39:51 Engine selected: 2017/03/11 06:39:51 Windows version 6.2.9200 (2), * 2017/03/11 06:39:51 Control server started 2017/03/11 06:39:55 Restore GUI state # 2017/03/11 06:39:55 Failed to restore main window geometry 2017/03/11 06:39:55 libDSP version 18.3.0 2017/03/11 06:39:55 Audio engine: network 2017/03/11 06:39:55 Network Audio IPv6 support disabled 2017/03/11 06:39:55 Discovery from 0.0.0.0 & 2017/03/11 06:39:55 Discovered network audio: name='default' version='Signalyst Network Audio Daemon 3.4.0' @10.0.0.102:43210 & 2017/03/11 06:39:55 Discovered network audio: name='default' version='Signalyst Network Audio Daemon 3.4.0' @10.0.0.102:43210 2017/03/11 06:39:56 Network endpoint: JLsounds Hi-Rez Audio 2.0: USB Audio (hw:0,0) 2017/03/11 06:39:56 Discovered 1 Network Audio Adapters 2017/03/11 06:39:56 Set channels: 2 (2) + 2017/03/11 06:39:56 Connect to 10.0.0.102:43210 2017/03/11 06:39:56 Network format: 44100/32/2 [pcm] 2017/03/11 06:39:56 Network format: 48000/32/2 [pcm] 2017/03/11 06:39:56 Network format: 88200/32/2 [pcm] 2017/03/11 06:39:56 Network format: 96000/32/2 [pcm] 2017/03/11 06:39:56 Network format: 176400/32/2 [pcm] 2017/03/11 06:39:56 Network format: 192000/32/2 [pcm] 2017/03/11 06:39:56 Network format: 352800/32/2 [pcm] 2017/03/11 06:39:56 Network format: 384000/32/2 [pcm] 2017/03/11 06:39:56 Network format: 2822400/1/2 [dsd] 2017/03/11 06:39:56 Network format: 3072000/1/2 [dsd] 2017/03/11 06:39:56 Network format: 5644800/1/2 [dsd] 2017/03/11 06:39:56 Network format: 6144000/1/2 [dsd] 2017/03/11 06:39:56 Network format: 11289600/1/2 [dsd] 2017/03/11 06:39:56 Network format: 12288000/1/2 [dsd] 2017/03/11 06:39:56 Volume limit: 0 2017/03/11 06:39:56 Automatic rate family disabled 2017/03/11 06:39:56 DirectSDM disabled 2017/03/11 06:39:56 Pipeline SDM disabled 2017/03/11 06:39:57 SDM conversion parameters (5, 0) 2017/03/11 06:39:57 DSD 6 dB gain disabled 2017/03/11 06:39:57 Initial parallel threads: 4 2017/03/11 06:39:57 Number of logical cores: 4 2017/03/11 06:39:57 Set filter: 6 2017/03/11 06:39:57 Set dither: 5 2017/03/11 06:39:57 Set filter: 0 2017/03/11 06:39:57 Set oversampling: 6 2017/03/11 06:39:57 Set filter: 0 2017/03/11 06:39:57 Automatic output rate switching enabled 2017/03/11 06:39:57 Set dither: 0 2017/03/11 06:39:57 Set modulator: 6 2017/03/11 06:39:57 Set dither: 0 2017/03/11 06:39:57 Automatic output rate switching enabled 2017/03/11 06:39:57 Automatic output rate switching enabled 2017/03/11 06:39:57 AutoSDM enabled 2017/03/11 06:39:57 SDM conversion parameters (5, 0) 2017/03/11 06:39:57 DSD 6 dB gain disabled 2017/03/11 06:39:57 Audio engine PCM mode enabled 2017/03/11 06:39:57 Set filter: 0 2017/03/11 06:39:57 Set dither: 0 2017/03/11 06:39:57 Set filter: 0 2017/03/11 06:39:57 Set oversampling: 6 2017/03/11 06:39:57 Set dither: 0 2017/03/11 06:39:57 Set modulator: 6 2017/03/11 06:39:57 Automatic output rate switching enabled & 2017/03/11 06:39:57 Playlist clear & 2017/03/11 06:39:57 Set transport (240): C:\Users\theob\AppData\Local\HQPlayer\current.m3u8 2017/03/11 06:39:57 Automatic output rate switching enabled 2017/03/11 06:40:09 Drop event: file:///H:/non dsd/52nd Street Blues Project - Blues & Grass.wav & 2017/03/11 06:40:09 Playlist add file: H:\non dsd\52nd Street Blues Project - Blues & Grass.wav 2017/03/11 06:40:09 Playlist add file: H:\non dsd\52nd Street Blues Project - Blues & Grass.wav 2017/03/11 06:40:12 Set convolution: 1 & 2017/03/11 06:40:12 GoTo & 2017/03/11 06:40:12 Play + 2017/03/11 06:40:12 Playback engine running - 2017/03/11 06:40:12 Network engine stopping... 2017/03/11 06:40:12 Set sampling rate: 44100 (44100) 2017/03/11 06:40:12 Rate or blocksize change triggered 2017/03/11 06:40:12 Rate: 44100, block size: 4704, frame size: 588 2017/03/11 06:40:12 Block size: 4704 (sample: 4) 2017/03/11 06:40:12 Playback engine ratio: 1 2017/03/11 06:40:12 Dither: none for 32-bit 2017/03/11 06:40:12 Initialization complete, starting audio engine + 2017/03/11 06:40:12 Network engine starting... 2017/03/11 06:40:12 Network PCM streaming + 2017/03/11 06:40:12 Network engine started at: 44100 2017/03/11 06:40:12 Parallel threads: 4 2017/03/11 06:40:12 Nested parallelism: 0 2017/03/11 06:40:12 Parallel pipelines: 2 Link to comment
louisxiawei Posted March 11, 2017 Share Posted March 11, 2017 Has anyone found the latest version 3.15.1 HQplayer sound very weird? Or just me? The sound is quite digital for me and makes my ear fatigue quickly. Another obvious difference is that running the same filter and sampling rate needs much less CPU load. Wondering whether it is the reason causing this problem. Software: Roon, Tidal, HQplayer HQplayer PC: i9 7980XE, Titan Xp, RTX 3090; i9 9900K, Titan V DAC: Holo Audio MAY L2, T+A DAC8 DSD, exasound e12, iFi micro iDSD BL USB tweaks: Intona, Uptone (ISO) regen, LPS-1, LPS-1.2, Sbooster Vbus2, Curious cables, SUPRA Certified HiSpeed USB cable NAA: Logic CL100 powered by Uptone JS-2 AMP: Spectral DMC 30SV, Spectral DMA 300RS Speaker: Magico S3 MKII Rack: HRS SXR signature Link to comment
Theobetley Posted March 11, 2017 Share Posted March 11, 2017 Now I cant run anything not even 16/44 no upsampling. 2017/03/11 06:39:51 Starting... 2017/03/11 06:39:51 Signalyst HQPlayer Desktop v3.15.1 2017/03/11 06:39:51 Engine selected: 2017/03/11 06:39:51 Windows version 6.2.9200 (2), * 2017/03/11 06:39:51 Control server started 2017/03/11 06:39:55 Restore GUI state # 2017/03/11 06:39:55 Failed to restore main window geometry 2017/03/11 06:39:55 libDSP version 18.3.0 2017/03/11 06:39:55 Audio engine: network 2017/03/11 06:39:55 Network Audio IPv6 support disabled 2017/03/11 06:39:55 Discovery from 0.0.0.0 & 2017/03/11 06:39:55 Discovered network audio: name='default' version='Signalyst Network Audio Daemon 3.4.0' @10.0.0.102:43210 & 2017/03/11 06:39:55 Discovered network audio: name='default' version='Signalyst Network Audio Daemon 3.4.0' @10.0.0.102:43210 2017/03/11 06:39:56 Network endpoint: JLsounds Hi-Rez Audio 2.0: USB Audio (hw:0,0) 2017/03/11 06:39:56 Discovered 1 Network Audio Adapters 2017/03/11 06:39:56 Set channels: 2 (2) + 2017/03/11 06:39:56 Connect to 10.0.0.102:43210 2017/03/11 06:39:56 Network format: 44100/32/2 [pcm] 2017/03/11 06:39:56 Network format: 48000/32/2 [pcm] 2017/03/11 06:39:56 Network format: 88200/32/2 [pcm] 2017/03/11 06:39:56 Network format: 96000/32/2 [pcm] 2017/03/11 06:39:56 Network format: 176400/32/2 [pcm] 2017/03/11 06:39:56 Network format: 192000/32/2 [pcm] 2017/03/11 06:39:56 Network format: 352800/32/2 [pcm] 2017/03/11 06:39:56 Network format: 384000/32/2 [pcm] 2017/03/11 06:39:56 Network format: 2822400/1/2 [dsd] 2017/03/11 06:39:56 Network format: 3072000/1/2 [dsd] 2017/03/11 06:39:56 Network format: 5644800/1/2 [dsd] 2017/03/11 06:39:56 Network format: 6144000/1/2 [dsd] 2017/03/11 06:39:56 Network format: 11289600/1/2 [dsd] 2017/03/11 06:39:56 Network format: 12288000/1/2 [dsd] 2017/03/11 06:39:56 Volume limit: 0 2017/03/11 06:39:56 Automatic rate family disabled 2017/03/11 06:39:56 DirectSDM disabled 2017/03/11 06:39:56 Pipeline SDM disabled 2017/03/11 06:39:57 SDM conversion parameters (5, 0) 2017/03/11 06:39:57 DSD 6 dB gain disabled 2017/03/11 06:39:57 Initial parallel threads: 4 2017/03/11 06:39:57 Number of logical cores: 4 2017/03/11 06:39:57 Set filter: 6 2017/03/11 06:39:57 Set dither: 5 2017/03/11 06:39:57 Set filter: 0 2017/03/11 06:39:57 Set oversampling: 6 2017/03/11 06:39:57 Set filter: 0 2017/03/11 06:39:57 Automatic output rate switching enabled 2017/03/11 06:39:57 Set dither: 0 2017/03/11 06:39:57 Set modulator: 6 2017/03/11 06:39:57 Set dither: 0 2017/03/11 06:39:57 Automatic output rate switching enabled 2017/03/11 06:39:57 Automatic output rate switching enabled 2017/03/11 06:39:57 AutoSDM enabled 2017/03/11 06:39:57 SDM conversion parameters (5, 0) 2017/03/11 06:39:57 DSD 6 dB gain disabled 2017/03/11 06:39:57 Audio engine PCM mode enabled 2017/03/11 06:39:57 Set filter: 0 2017/03/11 06:39:57 Set dither: 0 2017/03/11 06:39:57 Set filter: 0 2017/03/11 06:39:57 Set oversampling: 6 2017/03/11 06:39:57 Set dither: 0 2017/03/11 06:39:57 Set modulator: 6 2017/03/11 06:39:57 Automatic output rate switching enabled & 2017/03/11 06:39:57 Playlist clear & 2017/03/11 06:39:57 Set transport (240): C:\Users\theob\AppData\Local\HQPlayer\current.m3u8 2017/03/11 06:39:57 Automatic output rate switching enabled 2017/03/11 06:40:09 Drop event: file:///H:/non dsd/52nd Street Blues Project - Blues & Grass.wav & 2017/03/11 06:40:09 Playlist add file: H:\non dsd\52nd Street Blues Project - Blues & Grass.wav 2017/03/11 06:40:09 Playlist add file: H:\non dsd\52nd Street Blues Project - Blues & Grass.wav 2017/03/11 06:40:12 Set convolution: 1 & 2017/03/11 06:40:12 GoTo & 2017/03/11 06:40:12 Play + 2017/03/11 06:40:12 Playback engine running - 2017/03/11 06:40:12 Network engine stopping... 2017/03/11 06:40:12 Set sampling rate: 44100 (44100) 2017/03/11 06:40:12 Rate or blocksize change triggered 2017/03/11 06:40:12 Rate: 44100, block size: 4704, frame size: 588 2017/03/11 06:40:12 Block size: 4704 (sample: 4) 2017/03/11 06:40:12 Playback engine ratio: 1 2017/03/11 06:40:12 Dither: none for 32-bit 2017/03/11 06:40:12 Initialization complete, starting audio engine + 2017/03/11 06:40:12 Network engine starting... 2017/03/11 06:40:12 Network PCM streaming + 2017/03/11 06:40:12 Network engine started at: 44100 2017/03/11 06:40:12 Parallel threads: 4 2017/03/11 06:40:12 Nested parallelism: 0 2017/03/11 06:40:12 Parallel pipelines: 2 More log data 2017/03/11 08:13:31 Starting... 2017/03/11 08:13:31 Signalyst HQPlayer Desktop v3.15.1 2017/03/11 08:13:31 Engine selected: 2017/03/11 08:13:31 Windows version 6.2.9200 (2), * 2017/03/11 08:13:31 Control server started 2017/03/11 08:13:35 Restore GUI state 2017/03/11 08:13:35 libDSP version 18.3.0 2017/03/11 08:13:35 Audio engine: network 2017/03/11 08:13:35 Network Audio IPv6 support disabled 2017/03/11 08:13:35 Discovery from 0.0.0.0 & 2017/03/11 08:13:35 Discovered network audio: name='default' version='Signalyst Network Audio Daemon 3.4.0' @10.0.0.102:43210 & 2017/03/11 08:13:35 Discovered network audio: name='default' version='Signalyst Network Audio Daemon 3.4.0' @10.0.0.102:43210 2017/03/11 08:13:36 Network endpoint: JLsounds Hi-Rez Audio 2.0: USB Audio (hw:0,0) 2017/03/11 08:13:36 Discovered 1 Network Audio Adapters 2017/03/11 08:13:36 Set channels: 2 (2) + 2017/03/11 08:13:36 Connect to 10.0.0.102:43210 2017/03/11 08:13:36 Network format: 44100/32/2 [pcm] 2017/03/11 08:13:36 Network format: 48000/32/2 [pcm] 2017/03/11 08:13:36 Network format: 88200/32/2 [pcm] 2017/03/11 08:13:36 Network format: 96000/32/2 [pcm] 2017/03/11 08:13:36 Network format: 176400/32/2 [pcm] 2017/03/11 08:13:36 Network format: 192000/32/2 [pcm] 2017/03/11 08:13:36 Network format: 352800/32/2 [pcm] 2017/03/11 08:13:36 Network format: 384000/32/2 [pcm] 2017/03/11 08:13:36 Network format: 2822400/1/2 [dsd] 2017/03/11 08:13:36 Network format: 3072000/1/2 [dsd] 2017/03/11 08:13:36 Network format: 5644800/1/2 [dsd] 2017/03/11 08:13:36 Network format: 6144000/1/2 [dsd] 2017/03/11 08:13:36 Network format: 11289600/1/2 [dsd] 2017/03/11 08:13:36 Network format: 12288000/1/2 [dsd] 2017/03/11 08:13:36 Volume limit: 0 2017/03/11 08:13:36 Automatic rate family disabled 2017/03/11 08:13:36 DirectSDM disabled 2017/03/11 08:13:36 Pipeline SDM disabled 2017/03/11 08:13:36 SDM conversion parameters (5, 0) 2017/03/11 08:13:36 DSD 6 dB gain disabled 2017/03/11 08:13:36 Initial parallel threads: 4 2017/03/11 08:13:36 Number of logical cores: 4 2017/03/11 08:13:36 Set filter: 6 2017/03/11 08:13:36 Set dither: 5 2017/03/11 08:13:36 Set filter: 0 2017/03/11 08:13:36 Set oversampling: 6 2017/03/11 08:13:36 Set filter: 0 2017/03/11 08:13:36 Automatic output rate switching enabled 2017/03/11 08:13:36 Set dither: 0 2017/03/11 08:13:36 Set modulator: 6 2017/03/11 08:13:36 Set dither: 0 2017/03/11 08:13:36 Automatic output rate switching enabled 2017/03/11 08:13:36 Automatic output rate switching enabled 2017/03/11 08:13:36 AutoSDM enabled 2017/03/11 08:13:36 SDM conversion parameters (5, 0) 2017/03/11 08:13:36 DSD 6 dB gain disabled 2017/03/11 08:13:36 Audio engine PCM mode enabled 2017/03/11 08:13:36 Set filter: 0 2017/03/11 08:13:36 Set dither: 0 2017/03/11 08:13:36 Set filter: 0 2017/03/11 08:13:36 Set oversampling: 6 2017/03/11 08:13:36 Set dither: 0 2017/03/11 08:13:36 Set modulator: 6 2017/03/11 08:13:36 Automatic output rate switching enabled & 2017/03/11 08:13:44 Playlist clear & 2017/03/11 08:13:44 Set transport (240): 2017/03/11 08:13:44 Automatic output rate switching enabled 2017/03/11 08:13:44 Drop event: file:///H:/non dsd/Apollo's Fire & 2017/03/11 08:13:44 Playlist add directory: H:\non dsd\Apollo's Fire 2017/03/11 08:13:44 Playlist add directory: H:\non dsd\Apollo's Fire 2017/03/11 08:13:44 Automatic output rate switching enabled 2017/03/11 08:13:47 Set convolution: 1 & 2017/03/11 08:13:47 GoTo & 2017/03/11 08:13:47 Play + 2017/03/11 08:13:47 Playback engine running - 2017/03/11 08:13:47 Network engine stopping... 2017/03/11 08:13:47 Set sampling rate: 44100 (44100) 2017/03/11 08:13:47 Rate or blocksize change triggered 2017/03/11 08:13:47 Rate: 44100, block size: 4704, frame size: 588 2017/03/11 08:13:47 Block size: 4704 (sample: 4) 2017/03/11 08:13:47 Playback engine ratio: 1 2017/03/11 08:13:47 Dither: none for 32-bit 2017/03/11 08:13:47 Initialization complete, starting audio engine + 2017/03/11 08:13:47 Network engine starting... 2017/03/11 08:13:47 Network PCM streaming + 2017/03/11 08:13:47 Network engine started at: 44100 2017/03/11 08:13:47 Parallel threads: 4 2017/03/11 08:13:47 Nested parallelism: 0 2017/03/11 08:13:47 Parallel pipelines: 2 Link to comment
Solstice380 Posted March 11, 2017 Share Posted March 11, 2017 Please send log data by email. Takes up too much column space, and quoting it just doubles the stuff. Thanks! Sent from my iPad using Computer Audiophile https://audiophilestyle.com/profile/21384-solstice380/?tab=field_core_pfield_3 Link to comment
Solstice380 Posted March 11, 2017 Share Posted March 11, 2017 Has anyone found the latest version 3.15.1 HQplayer sound very weird? Or just me? The sound is quite digital for me and makes my ear fatigue quickly. Another obvious difference is that running the same filter and sampling rate needs much less CPU load. Wondering whether it is the reason causing this problem. I listened last night for about 5 hours so about 6 different CDs and didn't hear anything like that. I'm on Win 10 server and Win 10 NAA. Any possibility it was just a bad time for you to listen? Are you using a NAA or direct connection to DAC? No info in your post. https://audiophilestyle.com/profile/21384-solstice380/?tab=field_core_pfield_3 Link to comment
Theobetley Posted March 11, 2017 Share Posted March 11, 2017 Please send log data by email. Takes up too much column space, and quoting it just doubles the stuff. Thanks! Sent from my iPad using Computer Audiophile Ok Link to comment
louisxiawei Posted March 11, 2017 Share Posted March 11, 2017 Hi, I have direction connection to my DAC. My dac is T+A DAC 8 DSD. Some of my friends using T+A DAC8 DSD also spot this SQ problem. Treble is being quite digital compared to the 3.15 version. Software: Roon, Tidal, HQplayer HQplayer PC: i9 7980XE, Titan Xp, RTX 3090; i9 9900K, Titan V DAC: Holo Audio MAY L2, T+A DAC8 DSD, exasound e12, iFi micro iDSD BL USB tweaks: Intona, Uptone (ISO) regen, LPS-1, LPS-1.2, Sbooster Vbus2, Curious cables, SUPRA Certified HiSpeed USB cable NAA: Logic CL100 powered by Uptone JS-2 AMP: Spectral DMC 30SV, Spectral DMA 300RS Speaker: Magico S3 MKII Rack: HRS SXR signature Link to comment
ted_b Posted March 11, 2017 Share Posted March 11, 2017 I am dealing with slight treble harshness (and sporadic noise) lately too, but not isolated it yet to an HQP version. I run 3.15.1b2 on a tweaked out Win10 server, and currently using my WS2012R1 NAA (NAA version 3.4.something). I am going to update NAA to 3.5 today. Louis, Are you recommending going to 3.15.0 for comparison? "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
louisxiawei Posted March 11, 2017 Share Posted March 11, 2017 I am dealing with slight treble harshness (and sporadic noise) lately too, but not isolated it yet to an HQP version. I run 3.15.1b2 on a tweaked out Win10 server, and currently using my WS2012R1 NAA (NAA version 3.4.something). I am going to update NAA to 3.5 today. Louis, Are you recommending going to 3.15.0 for comparison? Hey Ted, Phew... I thought only me felt this harshness. Yes, 3.15.0 and previous versions are all fine. The 3.15.1 version gives very obvious harshness in general (not only in treble, but the treble part can let you feel the most) I did compare 3.15.1 and 3.15.0 back and forth several times and can confirm that. I have another three friends who use T+A DAC8 DSD share the same feeling with me. I'm using USB regen tweak connecting between PC and dac as followed. Don't think it's the usb chain's problem. PC- Intona - Sbooster Vbus2 - Uptone regen (powered by Uptone LPS-1) - Vbus 2 - T+A DAC8 DSD I'm also using Fidelizer Pro optimize my Windows 10 pro system. The harshness is more obvious when upsampling 44.1 PCM files to DSD512 compared to upsampling DSD256 files to DSD512. Software: Roon, Tidal, HQplayer HQplayer PC: i9 7980XE, Titan Xp, RTX 3090; i9 9900K, Titan V DAC: Holo Audio MAY L2, T+A DAC8 DSD, exasound e12, iFi micro iDSD BL USB tweaks: Intona, Uptone (ISO) regen, LPS-1, LPS-1.2, Sbooster Vbus2, Curious cables, SUPRA Certified HiSpeed USB cable NAA: Logic CL100 powered by Uptone JS-2 AMP: Spectral DMC 30SV, Spectral DMA 300RS Speaker: Magico S3 MKII Rack: HRS SXR signature Link to comment
Theobetley Posted March 11, 2017 Share Posted March 11, 2017 Ok What's really frustrating is that I lost internet at home. I am in a panera's drinking a latte which I hate. Anyway I have been having intermittent internet before I lost it and I think I may have gotten a bogus download of 3.15.1. Oh well. Link to comment
ismewor Posted March 11, 2017 Share Posted March 11, 2017 Yes, I am starting without the graphic card. I also read many threads and so some Miska's results, however, I am not able to grasp how much means good, only that more means better. For example, if I new my CPU will be at 60% while doing conversion and adding 1050 Ti would offload it by 20% this would make sense. Cuda offload is not a straight sub from CPU load. Also CPU load at 60% this just not going to cut it. Best my experience 40% load will start having issue. If, on the other hand, 1050 Ti reduces CPU load from 60% to 55%, then there's not much sense in adding the GPU. Also not all gpu card all the same 1050 just an entertainment lvl to this era. Or you can tell us your CPU and which load type and up sampling you are looking to achieve. Hope this help. Digital: Dac: Chord DAVE, Amp: MC275 Mono, Preamp: FirstSound, Source: Esoteric K01X, Cable: TaraLab GME interconnect,CAS: SOtM Trifecta Mod 75ohm MCI, TheLinearSolution TCXO Router Analog: SME 20/2, SME V, Skala, Esoteric C03 Phono Link to comment
tboooe Posted March 11, 2017 Share Posted March 11, 2017 I am dealing with slight treble harshness (and sporadic noise) lately too, but not isolated it yet to an HQP version. I run 3.15.1b2 on a tweaked out Win10 server, and currently using my WS2012R1 NAA (NAA version 3.4.something). I am going to update NAA to 3.5 today. Louis, Are you recommending going to 3.15.0 for comparison? What kind of noise ted? I started hearing occasional crackling but I thought it was because of my new Spring DAC. 12TB NAS >> i7-6700 Server/Control PC >> i3-5015u NAA >> Singxer SU-1 DDC (modded) >> Holo Spring L3 DAC >> Accustic Arts Power 1 int amp >> Sonus Faber Guaneri Evolution speakers + REL T/5i sub (x2) Other components: UpTone Audio LPS1.2/IsoRegen, Fiber Switch and FMC, Windows Server 2016 OS, Audiophile Optimizer 3.0, Fidelizer Pro 6, HQ Player, Roonserver, PS Audio P3 AC regenerator, HDPlex 400W ATX & 200W Linear PSU, Light Harmonic Lightspeed Split USB cable, Synergistic Research Tungsten AC power cords, Tara Labs The One speaker cables, Tara Labs The Two Extended with HFX Station IC, Oyaide R1 outlets, Stillpoints Ultra Mini footers, Hi-Fi Tuning fuses, Vicoustic/RealTraps/GIK room treatments Link to comment
Theobetley Posted March 11, 2017 Share Posted March 11, 2017 What's really frustrating is that I lost internet at home. I am in a panera's drinking a latte which I hate. Anyway I have been having intermittent internet before I lost it and I think I may have gotten a bogus download of 3.15.1. Oh well. More observational data. HQP stops when I change formats. I.e., when I run 24/176 files back to back all is ok. But when I go from 24/176 to 16/44 for example HQPlayer stops. Link to comment
Miska Posted March 11, 2017 Share Posted March 11, 2017 I run 3.15.1b2 on a tweaked out Win10 server Ted, why are you still on a beta version while the release has been out for a while already? Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Theobetley Posted March 11, 2017 Share Posted March 11, 2017 Dear Miska having trouble with HQPlayer stopping when I change formats Any ideas or work arounds please? Link to comment
ted_b Posted March 11, 2017 Share Posted March 11, 2017 Ted, why are you still on a beta version while the release has been out for a while already? Done! My beta2 was all of 20 days old btw. "We're all bozos on this bus"....F.T. My JRIver tutorial videos Actual JRIver tutorial MP4 video links My eleven yr old SACD Ripping Guide for PS3 (needs updating but still works) US Technical Advisor, NativeDSD.com Link to comment
bogi Posted March 11, 2017 Share Posted March 11, 2017 Yes, 3.15.0 and previous versions are all fine. The 3.15.1 version gives very obvious harshness in general (not only in treble, but the treble part can let you feel the most) I did compare 3.15.1 and 3.15.0 back and forth several times and can confirm that. I copied in RAM disk installation folders of both 3.15.0 and 3.15.1 (no beta) so I could quickly switch. Previously I had feeling that today is not my day to listen to music, somehow I was tired. But after reading few posts from this thread I set up this comparison. 3.15.0 sounds cleanly and comfortingly. I compared these versions back and forth about 5 times and the difference was always audible, always the same. I have to agree with louisxiawei. I tested 192k to 6.1M poly-sinc-xtr-2s / ASDM7. i7 11850H + RTX A2000 Win11 HQPlayer ► Topping HS02 ► 2x iFi iSilencer ► SMSL D300 ► DIY headamp DHA1 ► HiFiMan HE-500 Link to comment
Miska Posted March 11, 2017 Share Posted March 11, 2017 Dear Miska having trouble with HQPlayer stopping when I change formats Any ideas or work arounds please? What do you mean by stopping when you change formats? What settings are you using (main window)? And what are the the two formats that cause stop? Overall, there is at least one clear case when playback is stopped - when the combination of source format, filter and output format are not compatible. Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Theobetley Posted March 11, 2017 Share Posted March 11, 2017 What do you mean by stopping when you change formats? What settings are you using (main window)? And what are the the two formats that cause stop? Overall, there is at least one clear case when playback is stopped - when the combination of source format, filter and output format are not compatible. I mean hqp stops and shuts down. My settings are no filter, no dither for pcm. And right now I do a simple up sample to 2x dsf rate. But I can now run 24/176 but when I put a 16/44 file in my playlist and I try to run it hqp stops and shuts down. i use auto for all the drop down menus on the hqp GUI. Link to comment
Miska Posted March 11, 2017 Share Posted March 11, 2017 I mean hqp stops and shuts down. My settings are no filter, no dither for pcm. And right now I do a simple up sample to 2x dsf rate. But I can now run 24/176 but when I put a 16/44 file in my playlist and I try to run it hqp stops and shuts down. i use auto for all the drop down menus on the hqp GUI. If the mode is "Auto", then you are not doing PCM upsampling to 2x DSD. But of course it shouldn't crash in this case. Signalyst - Developer of HQPlayer Pulse & Fidelity - Software Defined Amplifiers Link to comment
Theobetley Posted March 11, 2017 Share Posted March 11, 2017 If the mode is "Auto", then you are not doing PCM upsampling to 2x DSD. But of course it shouldn't crash in this case. Let me try to be more clear. I run all pcm raw...no upsample, no dither, no nothing. When I run dsf files I had been running upsampling to 5.66 MbHz. I prefer running direct sdm. I am not sure what Hqp version I am Running. How can I easily tell? Link to comment
bogi Posted March 11, 2017 Share Posted March 11, 2017 Help > About i7 11850H + RTX A2000 Win11 HQPlayer ► Topping HS02 ► 2x iFi iSilencer ► SMSL D300 ► DIY headamp DHA1 ► HiFiMan HE-500 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now