Mutec MC-3+

[nige2000]

Acording to my experience, this should be done using some good wires as well, e.g. like this (Paul Hynes psu connected via silver/PTFE):

[ATTACH=CONFIG]22678[/ATTACH]

 

To my surprise the difference sonicwise was unexpected small.

Using a good isolation transformer in front of the MC-3+ did give a much bigger effect.

 

ymmv

Ulli

 

 

probably should put something like this MAL219691215E3 Vishay / BC Components | Mouser

 

at the point of 6.3v insertion