msr Posted March 14, 2017 Share Posted March 14, 2017 I am a very happy owner of T1 and I agree with you: clarity, not brightness! I my system, of course. Marcelo Link to comment
msr Posted March 16, 2017 Share Posted March 16, 2017 NEW firmware today. What are the changes? Link to comment
msr Posted October 5, 2017 Share Posted October 5, 2017 Here all the faults related to TIDAL were gone with the latest firmware. Marcelo wklie 1 Link to comment
msr Posted December 21, 2017 Share Posted December 21, 2017 My T1 is extremily quiet. Original power suply wklie 1 Link to comment
msr Posted April 8, 2018 Share Posted April 8, 2018 I am wondering if the xlr outputs of LUMIN T1 is trully balanced. thanks for any reply. Marcelo Link to comment
msr Posted April 17, 2018 Share Posted April 17, 2018 Another question, WKLIE: does the Lumin T1 has galvanic isolation on the ethernet port? Does products like this below make any difference in sound quality and sibilance? https://www.pinkfaun.com/index.php/pink-faun-lan-isolator-rj45.html Link to comment
msr Posted April 28, 2018 Share Posted April 28, 2018 I had a problem similar to Yours. In my network I have a modem and a router. The app connects to the Lumin only if both are connected to the wifi modem. Marcelo Link to comment
msr Posted December 8, 2019 Share Posted December 8, 2019 @wklie, Is there any chance of Amazon Prime in Lumin? Link to comment
msr Posted January 20, 2020 Share Posted January 20, 2020 I have a long time issue with my Lumin T1. When switching from other App to Lumin’s App, The screen Goes automatically to the beginning of The App. please, see The short vídeo below. Any clue to sort this out? https://drive.google.com/file/d/1yN0n6bTVrz6NlOtOybCbyfmdGyITNYB0/view?usp=drivesdk Marcelo Link to comment
msr Posted January 22, 2020 Share Posted January 22, 2020 11 hours ago, wklie said: We can neither reproduce this on an iPad Pro iOS 13.3 nor iPad Air iOS 11.4.1. If you were looking at Tidal search results, they do expire after some time. You mean you did not reproduce my video with The problem? Link to comment
msr Posted January 23, 2020 Share Posted January 23, 2020 8 hours ago, wklie said: We tried two different iPads two different iOS and we did not experience what you show in the video. But here the problem exists. Any hint? Link to comment
msr Posted January 23, 2020 Share Posted January 23, 2020 Here the same problem happens with both ipad and iphone... Link to comment
msr Posted January 25, 2020 Share Posted January 25, 2020 On 1/20/2020 at 3:16 PM, msr said: I have a long time issue with my Lumin T1. When switching from other App to Lumin’s App, The screen Goes automatically to the beginning of The App. please, see The short vídeo below. Any clue to sort this out? https://drive.google.com/file/d/1yN0n6bTVrz6NlOtOybCbyfmdGyITNYB0/view?usp=drivesdk Marcelo I finally discovered that this problem is caused boy The MinimServer at The Synology NAS. When disabled The MinimServer, The problem vanished! Thanks for The sugestions, Marcelo Link to comment
msr Posted September 30, 2020 Share Posted September 30, 2020 I have a BAT VK-51se as a preamp and a Classé CA-2300 as a power. I tried my Lumin T1 directly to the power and it was VERY inferior to the BAT... Not even close... Marcelo Link to comment
msr Posted September 30, 2020 Share Posted September 30, 2020 3 hours ago, BlueSkyy said: I have my X1 going straight into my old MC-1201 monos and I prefer the direct sound rather than going for my AV processor because of what the Marantz processor does to the sound. I am considering adding a stereo only preamp to my system and would like to know how the BAT VK-51se changes the sound of your T1 before sending it to your Classé amplifier? Surely! A big change, much more detail, more holographic, textures. All features are improved. I think BaT is a terrific acquisition. Good luck! Marcelo Link to comment
msr Posted July 23, 2021 Share Posted July 23, 2021 38 minutes ago, wklie said: Firmware 14 actually also has the following important changes not listed in the web release notes, applicable to all models: - Improve network bandwidth usage for gapless playback - Improve processing efficiency These could impact SQ, however small the difference is. I noticed that the starting of TIDAL playback is much slower now. For all tracks Link to comment
Popular Post msr Posted August 20, 2021 Popular Post Share Posted August 20, 2021 Very happy with a recent upgrade: from T1 to X1 :) Marcelo wklie and thingswelike 1 1 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now