Jump to content
IGNORED

HQPlayer's Network Audio Adapter

4est

Recommended Posts

Miska

Miska

Posted
Posted
10 minutes ago, semente said:

Does a Cubox NAA work with the RME ADI-2 DAC?

(RME only mentions Windows and MacOS support)

 

RME ADI-2 is UAC-2 compliant and I have implemented some custom support for it into Linux kernel. So yes it should work fine on any hardware platform running Linux that can just do enough data bandwidth.

 

Signalyst - Developer of HQPlayer

Pulse & Fidelity - Software Defined Amplifiers

Link to comment
semente

semente

Posted
Posted
6 minutes ago, Miska said:

 

RME ADI-2 is UAC-2 compliant and I have implemented some custom support for it into Linux kernel. So yes it should work fine on any hardware platform running Linux that can just do enough data bandwidth.

 

 

Thanks, that's great news.

"Science draws the wave, poetry fills it with water" Teixeira de Pascoaes

 

HQPlayer Desktop / Mac mini → Intona 7054 → RME ADI-2 DAC FS (DSD256)

Link to comment
jabbr

jabbr

Posted
Posted

@Miska I'm having trouble with networkaudiod on a wifi NAA becoming disconnected (not recognized by HQPE). The wired NAA is always recognized.

 

Here is syslog on the NAA: 

Jan 23 14:54:29 jon-NUC6CAYH systemd-resolved[640]: Server returned error NXDOMAIN, mitigating potential DNS violation DVE-2018-0001, retrying transaction with reduced feature level UDP.
Jan 23 14:54:50 jon-NUC6CAYH NetworkManager[710]: <info>  [1611431690.1197] policy: set 'wifi-xxxx' (wlp2s0) as default for IPv6 routing and DNS
Jan 23 14:54:53 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): discovery from [fe80::9a03:9bff:fe68:7777%wlp2s0]:36648
Jan 23 14:54:53 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): discovery from [fe80::9a03:9bff:fe68:7777%wlp2s0]:36648
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): connection from [fe80::9a03:9bff:fe68:7777%wlp2s0]:33654
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2073]: sh: 1: /etc/networkaudiod/onconnected: not found
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): asoundlib version: 1.2.2
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): Found ALSA device: hw:CARD=PCH,DEV=0 - HDA Intel PCH: ALC283 Analog
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): Found ALSA device: hw:CARD=PCH,DEV=1 - HDA Intel PCH: ALC283 Digital
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): Found ALSA device: hw:CARD=PCH,DEV=3 - HDA Intel PCH: HDMI 0
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): Found ALSA device: hw:CARD=PCH,DEV=7 - HDA Intel PCH: HDMI 1
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): Found ALSA device: hw:CARD=PCH,DEV=8 - HDA Intel PCH: HDMI 2
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): Found ALSA device: hw:CARD=PCH,DEV=9 - HDA Intel PCH: HDMI 3
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): Found ALSA device: hw:CARD=PCH,DEV=10 - HDA Intel PCH: HDMI 4
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): Found ALSA device: hw:CARD=Digital,DEV=0 - Pre Box S2 Digital: USB Audio
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): begin disconnection
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2078]: sh: 1: /etc/networkaudiod/ondisconnected: not found
Jan 23 14:54:54 jon-NUC6CAYH networkaudiod[2054]: [/usr/sbin/networkaudiod] (2054): disconnected [fe80::9a03:9bff:fe68:7777%wlp2s0]:33654
Jan 23 14:56:27 jon-NUC6CAYH NetworkManager[710]: <info>  [1611431787.6160] policy: set 'fred?barney' (wlp2s0) as default for IPv6 routing and DNS
Jan 23 14:56:31 jon-NUC6CAYH systemd[1]: Stopping Network Audio Adapter daemon...
Jan 23 14:56:31 jon-NUC6CAYH systemd[1]: networkaudiod.service: Succeeded.
Jan 23 14:56:31 jon-NUC6CAYH systemd[1]: Stopped Network Audio Adapter daemon.
Jan 23 14:56:31 jon-NUC6CAYH systemd[1]: Started Network Audio Adapter daemon.
Jan 23 14:56:31 jon-NUC6CAYH networkaudiod[2089]: [/usr/sbin/networkaudiod] (2089): networkaudiod Copyright (C) 2011-2020 Jussi Laako / Signalyst. All rights reserved.
Jan 23 14:56:31 jon-NUC6CAYH networkaudiod[2089]: [/usr/sbin/networkaudiod] (2089): create alsa engine
Jan 23 14:56:31 jon-NUC6CAYH networkaudiod[2089]: [/usr/sbin/networkaudiod] (2089): listen discovery on ::
Jan 23 14:56:31 jon-NUC6CAYH networkaudiod[2089]: [/usr/sbin/networkaudiod] (2089): listen discovery on 0.0.0.0
Jan 23 14:57:01 jon-NUC6CAYH NetworkManager[710]: <info>  [1611431821.5762] policy: set 'wifi-xxxx' (wlp2s0) as default for IPv6 routing and DNS
Jan 23 14:58:15 jon-NUC6CAYH NetworkManager[710]: <info>  [1611431895.5808] policy: set 'wifi-xxxx' (wlp2s0) as default for IPv6 routing and DNS
Jan 23 14:59:29 jon-NUC6CAYH systemd-resolved[640]: Server returned error NXDOMAIN, mitigating potential DNS violation DVE-2018-0001, retrying transaction with reduced feature level UDP.

 

The hqplayerd.log: 

2021/01/23 15:07:40 asoundlib version: 1.2.2
  2021/01/23 15:07:40 Found ALSA device: hw:CARD=PCH,DEV=0 - HDA Intel PCH: ALC3234 Analog
  2021/01/23 15:07:40 Found ALSA device: hw:CARD=NVidia,DEV=3 - HDA NVidia: HDMI 0
  2021/01/23 15:07:40 Found ALSA device: hw:CARD=NVidia,DEV=7 - HDA NVidia: HDMI 1
  2021/01/23 15:07:40 Found ALSA device: hw:CARD=NVidia,DEV=8 - HDA NVidia: HDMI 2
  2021/01/23 15:07:40 Found ALSA device: hw:CARD=NVidia,DEV=9 - HDA NVidia: HDMI 3
  2021/01/23 15:07:40 Found ALSA device: hw:CARD=NVidia,DEV=10 - HDA NVidia: HDMI 4
  2021/01/23 15:07:40 Found ALSA device: hw:CARD=NVidia,DEV=11 - HDA NVidia: HDMI 5
  2021/01/23 15:07:40 Found ALSA device: hw:CARD=NVidia,DEV=12 - HDA NVidia: HDMI 6
  2021/01/23 15:07:40  network Audio IPv6 support enabled
  2021/01/23 15:07:40  discovery from 0.0.0.0
& 2021/01/23 15:07:40  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/23 15:07:40  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
  2021/01/23 15:07:41  discovery from ::
& 2021/01/23 15:07:41  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/23 15:07:41  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/23 15:07:42  connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/23 15:07:42  network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/23 15:07:42 CUDA offload requested
  2021/01/23 15:07:42 libDSP version 21.14.0
  2021/01/23 15:07:42 HQPlayer Engine version 4.36.4
  2021/01/23 15:07:42 CUDA offload: all
  2021/01/23 15:07:42 Number of processor cores: 8
  2021/01/23 15:07:42 Core mask: 0000000000000000000000000000000000000000000000000000000011111111
  2021/01/23 15:07:42 CPU brand name: GenuineIntel
  2021/01/23 15:07:42 Core pinning enabled
  2021/01/23 15:07:42 Pool mask: 0000000000000000000000000000000000000000000000001111111100000000
  2021/01/23 15:07:42 Pool: {8,9,10,11,12,13,14,15}
  2021/01/23 15:07:42 Initial parallel threads: 16
  2021/01/23 15:07:42 Number of logical cores: 16
  2021/01/23 15:07:42 DSP thread pools enabled (3)
  2021/01/23 15:07:42 DSP pipelines disabled
  2021/01/23 15:07:42 Pipelined engine enabled
  2021/01/23 15:07:42 DirectSDM disabled
  2021/01/23 15:07:42 Audio engine: network
  2021/01/23 15:07:42 Input set channels: 2 (2)
  2021/01/23 15:07:42 Input supports DSD with any base rate
  2021/01/23 15:07:42 Input set channels: 2 (2)
  2021/01/23 15:07:42 Normal buffers
  2021/01/23 15:07:42 Hardware volume control disabled
  2021/01/23 15:07:42 Adaptive volume control disabled
  2021/01/23 15:07:42 Volume max: 0
  2021/01/23 15:07:42 Volume min: -60
  2021/01/23 15:07:42 Volume scaler: 0.75
  2021/01/23 15:07:42 Set volume: -6 +
  2021/01/23 15:07:42 NAA output network Audio IPv6 support enabled
  2021/01/23 15:07:42 Automatic rate family disabled
  2021/01/23 15:07:42 Full pause processing
  2021/01/23 15:07:42 NAA output discovery from 0.0.0.0
& 2021/01/23 15:07:42 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/23 15:07:42 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
  2021/01/23 15:07:42 SDM conversion parameters (8, 0)
  2021/01/23 15:07:42 DSD 6 dB gain enabled
& 2021/01/23 15:07:42 Set transport (240): 
  2021/01/23 15:07:42 Set filter: 26 / 24
  2021/01/23 15:07:42 Set dither: 5
  2021/01/23 15:07:42 Set oversampling: 23 / 23
  2021/01/23 15:07:42 Set modulator: 11
  2021/01/23 15:07:42 Audio engine is normal
  2021/01/23 15:07:42 IntegratorM: IIR
  2021/01/23 15:07:42 Audio engine SDM mode enabled
  2021/01/23 15:07:42 Requested output rate: 12288000
  2021/01/23 15:07:42 NAA output set sampling rate: 12288000 (12288000)
  2021/01/23 15:07:42 Automatic output rate switching enabled
& 2021/01/23 15:07:42 Convolution disabled
  2021/01/23 15:07:42 Control active volume range: -60 - 0 dB
  2021/01/23 15:07:42 Listen discovery on ::
  2021/01/23 15:07:42 Listen discovery on 0.0.0.0
  2021/01/23 15:07:42 Enable UPnP Renderer functionality for interface: auto
  2021/01/23 15:07:42 Adding interface 'eno1' for UPnP Renderer
  2021/01/23 15:07:42 Adding interface 'eth100g0' for UPnP Renderer
  2021/01/23 15:07:42 Adding interface 'eth100g1' for UPnP Renderer
% 2021/01/23 15:07:42 ...configuration reloaded
  2021/01/23 15:07:43 NAA output discovery from ::
& 2021/01/23 15:07:43 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/23 15:07:43 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/23 15:07:44 NAA output connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/23 15:07:44 NAA output network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/23 15:07:44 NAA output discovered 1 Network Audio Adapters
+ 2021/01/23 15:07:44 NAA output connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/23 15:07:44 NAA output network format: 44100/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 48000/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 88200/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 96000/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 176400/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 192000/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 352800/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 384000/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 705600/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 768000/32/2 [pcm] 
  2021/01/23 15:07:44 NAA output network format: 2822400/1/2 [dsd] 
  2021/01/23 15:07:44 NAA output network format: 3072000/1/2 [dsd] 
  2021/01/23 15:07:44 NAA output network format: 5644800/1/2 [dsd] 
  2021/01/23 15:07:44 NAA output network format: 6144000/1/2 [dsd] 
  2021/01/23 15:07:44 NAA output network format: 11289600/1/2 [dsd] 
  2021/01/23 15:07:44 NAA output network format: 12288000/1/2 [dsd] 
  2021/01/23 15:07:44 NAA output network format: 22579200/1/2 [dsd] 
  2021/01/23 15:07:44 NAA output network format: 24576000/1/2 [dsd]

 

 

Custom room treatments for headphone users.

Link to comment
Miska

Miska

Posted
Posted
16 minutes ago, jabbr said:

@Miska I'm having trouble with networkaudiod on a wifi NAA becoming disconnected (not recognized by HQPE). The wired NAA is always recognized.

 

This looks normal and functional, but what looks suspicious is this:

16 minutes ago, jabbr said:

Jan 23 14:56:27 jon-NUC6CAYH NetworkManager[710]: <info> [1611431787.6160] policy: set 'fred?barney' (wlp2s0) as default for IPv6 routing and DNS

 

NetworkManager can be pretty problematic overall. I'm using systemd-networkd instead.

 

Signalyst - Developer of HQPlayer

Pulse & Fidelity - Software Defined Amplifiers

Link to comment
jabbr

jabbr

Posted
Posted
50 minutes ago, Miska said:

 

This looks normal and functional, but what looks suspicious is this:

 

NetworkManager can be pretty problematic overall. I'm using systemd-networkd instead.

 

 

Yeah ... weird ... I used netplan to configure network, and told it networkd, but I guess I didn't explicitly disable NetworkManager or some evil person somewhere re-enabled it 🤷‍♂️

Custom room treatments for headphone users.

Link to comment
jabbr

jabbr

Posted
Posted
18 hours ago, jabbr said:

 

Yeah ... weird ... I used netplan to configure network, and told it networkd, but I guess I didn't explicitly disable NetworkManager or some evil person somewhere re-enabled it 🤷‍♂️

 

I must say that networkd/netplan is a waay better way to config wifi on the NAA also, just a single file...

 

Still having an issue intermittently .... now I think its related to the fact that my HQPE server is multihomed.... looked at the documentation but can't find the answer:

 

Is there a way to specify which network interface(s) HQPE uses in hqplayerd.xml ? Specifically I'd like to use one interface for discovery and another to output the music (if possible)

Custom room treatments for headphone users.

Link to comment
jabbr

jabbr

Posted
Posted

Ok now I think it has to do with IPV6 vs IPV4 discovery.

 

My wired NAA "clearfogbase" always shows up and is always discovered by both IPV6 and IPV4 but my wireless NAA "jons-NUC" is only discovered by IPV4 


* 2021/01/24 11:20:13 Signalyst HQPlayer 4 Embedded 4.20.3
+ 2021/01/24 11:20:13 Engine starting...
  2021/01/24 11:20:13 asoundlib version: 1.2.2
  2021/01/24 11:20:13 Found ALSA device: hw:CARD=PCH,DEV=0 - HDA Intel PCH: ALC3234 Analog
  2021/01/24 11:20:13 Found ALSA device: hw:CARD=NVidia,DEV=3 - HDA NVidia: HDMI 0
  2021/01/24 11:20:13 Found ALSA device: hw:CARD=NVidia,DEV=7 - HDA NVidia: HDMI 1
  2021/01/24 11:20:13 Found ALSA device: hw:CARD=NVidia,DEV=8 - HDA NVidia: HDMI 2
  2021/01/24 11:20:13 Found ALSA device: hw:CARD=NVidia,DEV=9 - HDA NVidia: HDMI 3
  2021/01/24 11:20:13 Found ALSA device: hw:CARD=NVidia,DEV=10 - HDA NVidia: HDMI 4
  2021/01/24 11:20:13 Found ALSA device: hw:CARD=NVidia,DEV=11 - HDA NVidia: HDMI 5
  2021/01/24 11:20:13 Found ALSA device: hw:CARD=NVidia,DEV=12 - HDA NVidia: HDMI 6
  2021/01/24 11:20:13  network Audio IPv6 support enabled
  2021/01/24 11:20:13  discovery from 0.0.0.0
& 2021/01/24 11:20:13  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:20:13  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
  2021/01/24 11:20:14  discovery from ::
& 2021/01/24 11:20:14  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/24 11:20:14  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/24 11:20:15  connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:20:15  network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:20:15 CUDA offload requested
  2021/01/24 11:20:16 libDSP version 21.14.0
  2021/01/24 11:20:16 HQPlayer Engine version 4.36.4
  2021/01/24 11:20:16 CUDA offload: all
  2021/01/24 11:20:16 Number of processor cores: 8
  2021/01/24 11:20:16 Core mask: 0000000000000000000000000000000000000000000000000000000011111111
  2021/01/24 11:20:16 CPU brand name: GenuineIntel
  2021/01/24 11:20:16 Core pinning enabled
  2021/01/24 11:20:16 Pool mask: 0000000000000000000000000000000000000000000000001111111100000000
  2021/01/24 11:20:16 Pool: {8,9,10,11,12,13,14,15}
  2021/01/24 11:20:16 Initial parallel threads: 16
  2021/01/24 11:20:16 Number of logical cores: 16
  2021/01/24 11:20:16 DSP thread pools enabled (3)
  2021/01/24 11:20:16 DSP pipelines disabled
  2021/01/24 11:20:16 Pipelined engine enabled
  2021/01/24 11:20:16 DirectSDM disabled
  2021/01/24 11:20:16 Audio engine: network
  2021/01/24 11:20:16 Input set channels: 2 (2)
  2021/01/24 11:20:16 Input supports DSD with any base rate
  2021/01/24 11:20:16 Input set channels: 2 (2)
  2021/01/24 11:20:16 Normal buffers
  2021/01/24 11:20:16 Hardware volume control disabled
  2021/01/24 11:20:16 Adaptive volume control disabled
  2021/01/24 11:20:16 Volume max: 0
  2021/01/24 11:20:16 Volume min: -60
  2021/01/24 11:20:16 Volume scaler: 0.75
  2021/01/24 11:20:16 Set volume: -6 +
  2021/01/24 11:20:16 NAA output network Audio IPv6 support enabled
  2021/01/24 11:20:16 NAA output discovery from 0.0.0.0
  2021/01/24 11:20:16 Automatic rate family disabled
  2021/01/24 11:20:16 Full pause processing
& 2021/01/24 11:20:16 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:20:16 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:20:16 NAA output discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
& 2021/01/24 11:20:16 NAA output discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
  2021/01/24 11:20:16 SDM conversion parameters (8, 0)
  2021/01/24 11:20:16 DSD 6 dB gain enabled
& 2021/01/24 11:20:16 Set transport (240): 
  2021/01/24 11:20:16 Set filter: 26 / 24
  2021/01/24 11:20:16 Set dither: 5
  2021/01/24 11:20:16 Set oversampling: 23 / 23
  2021/01/24 11:20:16 Set modulator: 11
  2021/01/24 11:20:16 Audio engine is normal
  2021/01/24 11:20:16 IntegratorM: IIR
  2021/01/24 11:20:16 Audio engine SDM mode enabled
  2021/01/24 11:20:16 Requested output rate: 12288000
  2021/01/24 11:20:16 NAA output set sampling rate: 12288000 (12288000)
  2021/01/24 11:20:16 Automatic output rate switching enabled
& 2021/01/24 11:20:16 Convolution disabled
+ 2021/01/24 11:20:16 Server starting...
  2021/01/24 11:20:16 Control active volume range: -60 - 0 dB
  2021/01/24 11:20:16 Listen discovery on ::
  2021/01/24 11:20:16 Listen discovery on 0.0.0.0
  2021/01/24 11:20:16 Enable UPnP Renderer functionality for interface: auto
  2021/01/24 11:20:16 Adding interface 'eno1' for UPnP Renderer
  2021/01/24 11:20:16 Adding interface 'eth100g0' for UPnP Renderer
  2021/01/24 11:20:16 Adding interface 'eth100g1' for UPnP Renderer
  2021/01/24 11:20:17 NAA output discovery from ::
& 2021/01/24 11:20:17 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/24 11:20:17 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/24 11:20:18 NAA output connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:20:18 NAA output network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:20:18 NAA output connect to 192.168.1.31:43210 [ipv4]
  2021/01/24 11:20:18 NAA output network endpoint: Pre Box S2 Digital: USB Audio (hw:CARD=Digital,DEV=0)
  2021/01/24 11:20:18 NAA output network endpoint: HDA Intel PCH: ALC283 Analog (hw:CARD=PCH,DEV=0)
  2021/01/24 11:20:18 NAA output network endpoint: HDA Intel PCH: ALC283 Digital (hw:CARD=PCH,DEV=1)
  2021/01/24 11:20:18 NAA output network endpoint: HDA Intel PCH: HDMI 4 (hw:CARD=PCH,DEV=10)
  2021/01/24 11:20:18 NAA output network endpoint: HDA Intel PCH: HDMI 0 (hw:CARD=PCH,DEV=3)
  2021/01/24 11:20:18 NAA output network endpoint: HDA Intel PCH: HDMI 1 (hw:CARD=PCH,DEV=7)
  2021/01/24 11:20:18 NAA output network endpoint: HDA Intel PCH: HDMI 2 (hw:CARD=PCH,DEV=8)
  2021/01/24 11:20:18 NAA output network endpoint: HDA Intel PCH: HDMI 3 (hw:CARD=PCH,DEV=9)
  2021/01/24 11:20:18 NAA output discovered 2 Network Audio Adapters
+ 2021/01/24 11:20:18 NAA output connect to 192.168.1.31:43210 [ipv4]
  2021/01/24 11:20:18 NAA output network format: 44100/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 48000/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 88200/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 96000/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 176400/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 192000/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 352800/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 384000/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 705600/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 768000/32/2 [pcm] 
  2021/01/24 11:20:18 NAA output network format: 2822400/1/2 [dsd] 
  2021/01/24 11:20:18 NAA output network format: 3072000/1/2 [dsd] 
  2021/01/24 11:20:18 NAA output network format: 5644800/1/2 [dsd] 
  2021/01/24 11:20:18 NAA output network format: 6144000/1/2 [dsd] 
  2021/01/24 11:20:18 NAA output network format: 11289600/1/2 [dsd] 
  2021/01/24 11:20:18 NAA output network format: 12288000/1/2 [dsd] 
  2021/01/24 11:20:18 NAA output network format: 22579200/1/2 [dsd] 
  2021/01/24 11:20:18 NAA output network format: 24576000/1/2 [dsd] 
  2021/01/24 11:20:36 Web configuration written
% 2021/01/24 11:20:38 Reloading configuration...

  2021/01/24 11:20:38 asoundlib version: 1.2.2
  2021/01/24 11:20:38 Found ALSA device: hw:CARD=PCH,DEV=0 - HDA Intel PCH: ALC3234 Analog
  2021/01/24 11:20:39 Found ALSA device: hw:CARD=NVidia,DEV=3 - HDA NVidia: HDMI 0
  2021/01/24 11:20:39 Found ALSA device: hw:CARD=NVidia,DEV=7 - HDA NVidia: HDMI 1
  2021/01/24 11:20:39 Found ALSA device: hw:CARD=NVidia,DEV=8 - HDA NVidia: HDMI 2
  2021/01/24 11:20:39 Found ALSA device: hw:CARD=NVidia,DEV=9 - HDA NVidia: HDMI 3
  2021/01/24 11:20:39 Found ALSA device: hw:CARD=NVidia,DEV=10 - HDA NVidia: HDMI 4
  2021/01/24 11:20:39 Found ALSA device: hw:CARD=NVidia,DEV=11 - HDA NVidia: HDMI 5
  2021/01/24 11:20:39 Found ALSA device: hw:CARD=NVidia,DEV=12 - HDA NVidia: HDMI 6
  2021/01/24 11:20:39  network Audio IPv6 support enabled
  2021/01/24 11:20:39  discovery from 0.0.0.0
& 2021/01/24 11:20:39  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:20:39  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
  2021/01/24 11:20:40  discovery from ::
& 2021/01/24 11:20:40  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/24 11:20:40  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/24 11:20:41  connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:20:41  network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:20:41 CUDA offload requested
  2021/01/24 11:20:41 libDSP version 21.14.0
  2021/01/24 11:20:41 HQPlayer Engine version 4.36.4
  2021/01/24 11:20:41 CUDA offload: all
  2021/01/24 11:20:41 Number of processor cores: 8
  2021/01/24 11:20:41 Core mask: 0000000000000000000000000000000000000000000000000000000011111111
  2021/01/24 11:20:41 CPU brand name: GenuineIntel
  2021/01/24 11:20:41 Core pinning enabled
  2021/01/24 11:20:41 Pool mask: 0000000000000000000000000000000000000000000000001111111100000000
  2021/01/24 11:20:41 Pool: {8,9,10,11,12,13,14,15}
  2021/01/24 11:20:41 Initial parallel threads: 16
  2021/01/24 11:20:41 Number of logical cores: 16
  2021/01/24 11:20:41 DSP thread pools enabled (3)
  2021/01/24 11:20:41 DSP pipelines disabled
  2021/01/24 11:20:41 Pipelined engine enabled
  2021/01/24 11:20:41 DirectSDM disabled
  2021/01/24 11:20:41 Audio engine: network
  2021/01/24 11:20:41 Input set channels: 2 (2)
  2021/01/24 11:20:41 Input supports DSD with any base rate
  2021/01/24 11:20:41 Input set channels: 2 (2)
  2021/01/24 11:20:41 Normal buffers
  2021/01/24 11:20:41 Hardware volume control disabled
  2021/01/24 11:20:41 Adaptive volume control disabled
  2021/01/24 11:20:41 Volume max: 0
  2021/01/24 11:20:41 Volume min: -60
  2021/01/24 11:20:41 Volume scaler: 0.75
  2021/01/24 11:20:41 Set volume: -6 +
  2021/01/24 11:20:41 NAA output network Audio IPv6 support enabled
  2021/01/24 11:20:41 NAA output discovery from 0.0.0.0
  2021/01/24 11:20:41 Automatic rate family disabled
  2021/01/24 11:20:41 Full pause processing
& 2021/01/24 11:20:41 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:20:41 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
  2021/01/24 11:20:41 SDM conversion parameters (8, 0)
  2021/01/24 11:20:41 DSD 6 dB gain enabled
& 2021/01/24 11:20:41 Set transport (240): 
  2021/01/24 11:20:41 Set filter: 26 / 24
  2021/01/24 11:20:41 Set dither: 5
  2021/01/24 11:20:41 Set oversampling: 23 / 23
  2021/01/24 11:20:41 Set modulator: 11
  2021/01/24 11:20:41 Audio engine is normal
  2021/01/24 11:20:41 IntegratorM: IIR
  2021/01/24 11:20:41 Audio engine SDM mode enabled
  2021/01/24 11:20:41 Requested output rate: 12288000
  2021/01/24 11:20:41 NAA output set sampling rate: 12288000 (12288000)
  2021/01/24 11:20:41 Automatic output rate switching enabled
& 2021/01/24 11:20:41 Convolution disabled
  2021/01/24 11:20:41 Control active volume range: -60 - 0 dB
  2021/01/24 11:20:41 Listen discovery on ::
  2021/01/24 11:20:41 Listen discovery on 0.0.0.0
  2021/01/24 11:20:41 Enable UPnP Renderer functionality for interface: auto
  2021/01/24 11:20:41 Adding interface 'eno1' for UPnP Renderer
  2021/01/24 11:20:41 Adding interface 'eth100g0' for UPnP Renderer
  2021/01/24 11:20:41 Adding interface 'eth100g1' for UPnP Renderer
% 2021/01/24 11:20:41 ...configuration reloaded
  2021/01/24 11:20:42 NAA output discovery from ::
& 2021/01/24 11:20:42 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/24 11:20:42 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/24 11:20:43 NAA output connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:20:43 NAA output network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:20:43 NAA output discovered 1 Network Audio Adapters
+ 2021/01/24 11:20:43 NAA output connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:20:43 NAA output network format: 44100/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 48000/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 88200/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 96000/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 176400/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 192000/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 352800/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 384000/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 705600/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 768000/32/2 [pcm] 
  2021/01/24 11:20:43 NAA output network format: 2822400/1/2 [dsd] 
  2021/01/24 11:20:43 NAA output network format: 3072000/1/2 [dsd] 
  2021/01/24 11:20:43 NAA output network format: 5644800/1/2 [dsd] 
  2021/01/24 11:20:43 NAA output network format: 6144000/1/2 [dsd] 
  2021/01/24 11:20:43 NAA output network format: 11289600/1/2 [dsd] 
  2021/01/24 11:20:43 NAA output network format: 12288000/1/2 [dsd] 
  2021/01/24 11:20:43 NAA output network format: 22579200/1/2 [dsd] 
  2021/01/24 11:20:43 NAA output network format: 24576000/1/2 [dsd] 
  2021/01/24 11:20:52 Web configuration written
% 2021/01/24 11:20:54 Reloading configuration...

  2021/01/24 11:20:54 asoundlib version: 1.2.2
  2021/01/24 11:20:54 Found ALSA device: hw:CARD=PCH,DEV=0 - HDA Intel PCH: ALC3234 Analog
  2021/01/24 11:20:54 Found ALSA device: hw:CARD=NVidia,DEV=3 - HDA NVidia: HDMI 0
  2021/01/24 11:20:54 Found ALSA device: hw:CARD=NVidia,DEV=7 - HDA NVidia: HDMI 1
  2021/01/24 11:20:54 Found ALSA device: hw:CARD=NVidia,DEV=8 - HDA NVidia: HDMI 2
  2021/01/24 11:20:54 Found ALSA device: hw:CARD=NVidia,DEV=9 - HDA NVidia: HDMI 3
  2021/01/24 11:20:54 Found ALSA device: hw:CARD=NVidia,DEV=10 - HDA NVidia: HDMI 4
  2021/01/24 11:20:54 Found ALSA device: hw:CARD=NVidia,DEV=11 - HDA NVidia: HDMI 5
  2021/01/24 11:20:54 Found ALSA device: hw:CARD=NVidia,DEV=12 - HDA NVidia: HDMI 6
  2021/01/24 11:20:54  network Audio IPv6 support enabled
  2021/01/24 11:20:54  discovery from 0.0.0.0
& 2021/01/24 11:20:54  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:20:54  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
  2021/01/24 11:20:55  discovery from ::
& 2021/01/24 11:20:55  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/24 11:20:55  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/24 11:20:56  connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:20:56  network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:20:56 CUDA offload requested
  2021/01/24 11:20:56 libDSP version 21.14.0
  2021/01/24 11:20:56 HQPlayer Engine version 4.36.4
  2021/01/24 11:20:56 CUDA offload: all
  2021/01/24 11:20:56 Number of processor cores: 8
  2021/01/24 11:20:56 Core mask: 0000000000000000000000000000000000000000000000000000000011111111
  2021/01/24 11:20:56 CPU brand name: GenuineIntel
  2021/01/24 11:20:56 Core pinning enabled
  2021/01/24 11:20:56 Pool mask: 0000000000000000000000000000000000000000000000001111111100000000
  2021/01/24 11:20:56 Pool: {8,9,10,11,12,13,14,15}
  2021/01/24 11:20:56 Initial parallel threads: 16
  2021/01/24 11:20:56 Number of logical cores: 16
  2021/01/24 11:20:56 DSP thread pools enabled (3)
  2021/01/24 11:20:56 DSP pipelines disabled
  2021/01/24 11:20:56 Pipelined engine enabled
  2021/01/24 11:20:56 DirectSDM disabled
  2021/01/24 11:20:56 Audio engine: network
  2021/01/24 11:20:56 Input set channels: 2 (2)
  2021/01/24 11:20:56 Input supports DSD with any base rate
  2021/01/24 11:20:56 Input set channels: 2 (2)
  2021/01/24 11:20:56 Normal buffers
  2021/01/24 11:20:56 Hardware volume control disabled
  2021/01/24 11:20:56 Adaptive volume control disabled
  2021/01/24 11:20:56 Volume max: 0
  2021/01/24 11:20:56 Volume min: -60
  2021/01/24 11:20:56 Volume scaler: 0.75
  2021/01/24 11:20:56 Set volume: -6 +
  2021/01/24 11:20:56 NAA output network Audio IPv6 support enabled
  2021/01/24 11:20:56 NAA output discovery from 0.0.0.0
  2021/01/24 11:20:56 Automatic rate family disabled
  2021/01/24 11:20:56 Full pause processing
& 2021/01/24 11:20:56 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:20:56 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:20:56 NAA output discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
  2021/01/24 11:20:56 SDM conversion parameters (8, 0)
  2021/01/24 11:20:56 DSD 6 dB gain enabled
& 2021/01/24 11:20:56 Set transport (240): 
  2021/01/24 11:20:56 Set filter: 26 / 24
  2021/01/24 11:20:56 Set dither: 5
  2021/01/24 11:20:56 Set oversampling: 23 / 23
  2021/01/24 11:20:56 Set modulator: 11
  2021/01/24 11:20:56 Audio engine is normal
  2021/01/24 11:20:56 IntegratorM: IIR
& 2021/01/24 11:20:56 NAA output discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
  2021/01/24 11:20:56 Audio engine SDM mode enabled
  2021/01/24 11:20:56 Requested output rate: 12288000
  2021/01/24 11:20:56 NAA output set sampling rate: 12288000 (12288000)
  2021/01/24 11:20:56 Automatic output rate switching enabled
& 2021/01/24 11:20:56 Convolution disabled
  2021/01/24 11:20:56 Control active volume range: -60 - 0 dB
  2021/01/24 11:20:56 Listen discovery on ::
  2021/01/24 11:20:56 Listen discovery on 0.0.0.0
  2021/01/24 11:20:56 Enable UPnP Renderer functionality for interface: auto
  2021/01/24 11:20:56 Adding interface 'eno1' for UPnP Renderer
  2021/01/24 11:20:56 Adding interface 'eth100g0' for UPnP Renderer
  2021/01/24 11:20:56 Adding interface 'eth100g1' for UPnP Renderer
% 2021/01/24 11:20:56 ...configuration reloaded
  2021/01/24 11:20:57 NAA output discovery from ::
& 2021/01/24 11:20:57 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/24 11:20:57 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/24 11:20:58 NAA output connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:20:58 NAA output network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:20:58 NAA output connect to 192.168.1.31:43210 [ipv4]
  2021/01/24 11:20:59 NAA output network endpoint: Pre Box S2 Digital: USB Audio (hw:CARD=Digital,DEV=0)
  2021/01/24 11:20:59 NAA output network endpoint: HDA Intel PCH: ALC283 Analog (hw:CARD=PCH,DEV=0)
  2021/01/24 11:20:59 NAA output network endpoint: HDA Intel PCH: ALC283 Digital (hw:CARD=PCH,DEV=1)
  2021/01/24 11:20:59 NAA output network endpoint: HDA Intel PCH: HDMI 4 (hw:CARD=PCH,DEV=10)
  2021/01/24 11:20:59 NAA output network endpoint: HDA Intel PCH: HDMI 0 (hw:CARD=PCH,DEV=3)
  2021/01/24 11:20:59 NAA output network endpoint: HDA Intel PCH: HDMI 1 (hw:CARD=PCH,DEV=7)
  2021/01/24 11:20:59 NAA output network endpoint: HDA Intel PCH: HDMI 2 (hw:CARD=PCH,DEV=8)
  2021/01/24 11:20:59 NAA output network endpoint: HDA Intel PCH: HDMI 3 (hw:CARD=PCH,DEV=9)
  2021/01/24 11:20:59 NAA output discovered 2 Network Audio Adapters
+ 2021/01/24 11:20:59 NAA output connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:20:59 NAA output network format: 44100/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 48000/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 88200/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 96000/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 176400/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 192000/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 352800/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 384000/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 705600/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 768000/32/2 [pcm] 
  2021/01/24 11:20:59 NAA output network format: 2822400/1/2 [dsd] 
  2021/01/24 11:20:59 NAA output network format: 3072000/1/2 [dsd] 
  2021/01/24 11:20:59 NAA output network format: 5644800/1/2 [dsd] 
  2021/01/24 11:20:59 NAA output network format: 6144000/1/2 [dsd] 
  2021/01/24 11:20:59 NAA output network format: 11289600/1/2 [dsd] 
  2021/01/24 11:20:59 NAA output network format: 12288000/1/2 [dsd] 
  2021/01/24 11:20:59 NAA output network format: 22579200/1/2 [dsd] 
  2021/01/24 11:20:59 NAA output network format: 24576000/1/2 [dsd] 
  2021/01/24 11:21:13 Web configuration written
% 2021/01/24 11:21:15 Reloading configuration...

  2021/01/24 11:21:16 asoundlib version: 1.2.2
  2021/01/24 11:21:16 Found ALSA device: hw:CARD=PCH,DEV=0 - HDA Intel PCH: ALC3234 Analog
  2021/01/24 11:21:16 Found ALSA device: hw:CARD=NVidia,DEV=3 - HDA NVidia: HDMI 0
  2021/01/24 11:21:16 Found ALSA device: hw:CARD=NVidia,DEV=7 - HDA NVidia: HDMI 1
  2021/01/24 11:21:16 Found ALSA device: hw:CARD=NVidia,DEV=8 - HDA NVidia: HDMI 2
  2021/01/24 11:21:16 Found ALSA device: hw:CARD=NVidia,DEV=9 - HDA NVidia: HDMI 3
  2021/01/24 11:21:16 Found ALSA device: hw:CARD=NVidia,DEV=10 - HDA NVidia: HDMI 4
  2021/01/24 11:21:16 Found ALSA device: hw:CARD=NVidia,DEV=11 - HDA NVidia: HDMI 5
  2021/01/24 11:21:16 Found ALSA device: hw:CARD=NVidia,DEV=12 - HDA NVidia: HDMI 6
  2021/01/24 11:21:16  network Audio IPv6 support disabled
  2021/01/24 11:21:16  discovery from 0.0.0.0
& 2021/01/24 11:21:16  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:21:16  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:21:16  discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
& 2021/01/24 11:21:16  discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
  2021/01/24 11:21:17  connect to 192.168.1.105:43210 [ipv4]
  2021/01/24 11:21:17  network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:21:17  connect to 192.168.1.31:43210 [ipv4]
  2021/01/24 11:21:17  network endpoint: Pre Box S2 Digital: USB Audio (hw:CARD=Digital,DEV=0)
  2021/01/24 11:21:17  network endpoint: HDA Intel PCH: ALC283 Analog (hw:CARD=PCH,DEV=0)
  2021/01/24 11:21:17  network endpoint: HDA Intel PCH: ALC283 Digital (hw:CARD=PCH,DEV=1)
  2021/01/24 11:21:17  network endpoint: HDA Intel PCH: HDMI 4 (hw:CARD=PCH,DEV=10)
  2021/01/24 11:21:17  network endpoint: HDA Intel PCH: HDMI 0 (hw:CARD=PCH,DEV=3)
  2021/01/24 11:21:17  network endpoint: HDA Intel PCH: HDMI 1 (hw:CARD=PCH,DEV=7)
  2021/01/24 11:21:17  network endpoint: HDA Intel PCH: HDMI 2 (hw:CARD=PCH,DEV=8)
  2021/01/24 11:21:17  network endpoint: HDA Intel PCH: HDMI 3 (hw:CARD=PCH,DEV=9)
  2021/01/24 11:21:17 CUDA offload requested
  2021/01/24 11:21:17 libDSP version 21.14.0
  2021/01/24 11:21:17 HQPlayer Engine version 4.36.4
  2021/01/24 11:21:17 CUDA offload: all
  2021/01/24 11:21:17 Number of processor cores: 8
  2021/01/24 11:21:17 Core mask: 0000000000000000000000000000000000000000000000000000000011111111
  2021/01/24 11:21:17 CPU brand name: GenuineIntel
  2021/01/24 11:21:17 Core pinning enabled
  2021/01/24 11:21:17 Pool mask: 0000000000000000000000000000000000000000000000001111111100000000
  2021/01/24 11:21:17 Pool: {8,9,10,11,12,13,14,15}
  2021/01/24 11:21:17 Initial parallel threads: 16
  2021/01/24 11:21:17 Number of logical cores: 16
  2021/01/24 11:21:17 DSP thread pools enabled (3)
  2021/01/24 11:21:17 DSP pipelines disabled
  2021/01/24 11:21:17 Pipelined engine enabled
  2021/01/24 11:21:17 DirectSDM disabled
  2021/01/24 11:21:17 Audio engine: network
  2021/01/24 11:21:17 Input set channels: 2 (2)
  2021/01/24 11:21:17 Input supports DSD with any base rate
  2021/01/24 11:21:17 Input set channels: 2 (2)
  2021/01/24 11:21:17 Normal buffers
  2021/01/24 11:21:17 Hardware volume control disabled
  2021/01/24 11:21:17 Adaptive volume control disabled
  2021/01/24 11:21:17 Volume max: 0
  2021/01/24 11:21:17 Volume min: -60
  2021/01/24 11:21:17 Volume scaler: 0.75
  2021/01/24 11:21:17 Set volume: -6 +
  2021/01/24 11:21:17 NAA output network Audio IPv6 support disabled
  2021/01/24 11:21:17 Automatic rate family disabled
  2021/01/24 11:21:17 NAA output discovery from 0.0.0.0
  2021/01/24 11:21:17 Full pause processing
& 2021/01/24 11:21:17 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:21:17 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:21:17 NAA output discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
& 2021/01/24 11:21:17 NAA output discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
  2021/01/24 11:21:17 SDM conversion parameters (8, 0)
  2021/01/24 11:21:17 DSD 6 dB gain enabled
& 2021/01/24 11:21:17 Set transport (240): 
  2021/01/24 11:21:17 Set filter: 26 / 24
  2021/01/24 11:21:17 Set dither: 5
  2021/01/24 11:21:17 Set oversampling: 23 / 23
  2021/01/24 11:21:17 Set modulator: 11
  2021/01/24 11:21:17 Audio engine is normal
  2021/01/24 11:21:17 IntegratorM: IIR
  2021/01/24 11:21:17 Audio engine SDM mode enabled
  2021/01/24 11:21:17 Requested output rate: 12288000
  2021/01/24 11:21:17 NAA output set sampling rate: 12288000 (12288000)
  2021/01/24 11:21:17 Automatic output rate switching enabled
& 2021/01/24 11:21:17 Convolution disabled
  2021/01/24 11:21:17 Control active volume range: -60 - 0 dB
  2021/01/24 11:21:17 Listen discovery on ::
  2021/01/24 11:21:17 Listen discovery on 0.0.0.0
  2021/01/24 11:21:17 Enable UPnP Renderer functionality for interface: auto
  2021/01/24 11:21:17 Adding interface 'eno1' for UPnP Renderer
  2021/01/24 11:21:17 Adding interface 'eth100g0' for UPnP Renderer
  2021/01/24 11:21:17 Adding interface 'eth100g1' for UPnP Renderer
% 2021/01/24 11:21:17 ...configuration reloaded
  2021/01/24 11:21:18 NAA output connect to 192.168.1.105:43210 [ipv4]
  2021/01/24 11:21:18 NAA output network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:21:18 NAA output connect to 192.168.1.31:43210 [ipv4]
  2021/01/24 11:21:18 NAA output network endpoint: Pre Box S2 Digital: USB Audio (hw:CARD=Digital,DEV=0)
  2021/01/24 11:21:18 NAA output network endpoint: HDA Intel PCH: ALC283 Analog (hw:CARD=PCH,DEV=0)
  2021/01/24 11:21:18 NAA output network endpoint: HDA Intel PCH: ALC283 Digital (hw:CARD=PCH,DEV=1)
  2021/01/24 11:21:18 NAA output network endpoint: HDA Intel PCH: HDMI 4 (hw:CARD=PCH,DEV=10)
  2021/01/24 11:21:18 NAA output network endpoint: HDA Intel PCH: HDMI 0 (hw:CARD=PCH,DEV=3)
  2021/01/24 11:21:18 NAA output network endpoint: HDA Intel PCH: HDMI 1 (hw:CARD=PCH,DEV=7)
  2021/01/24 11:21:18 NAA output network endpoint: HDA Intel PCH: HDMI 2 (hw:CARD=PCH,DEV=8)
  2021/01/24 11:21:18 NAA output network endpoint: HDA Intel PCH: HDMI 3 (hw:CARD=PCH,DEV=9)
  2021/01/24 11:21:18 NAA output discovered 2 Network Audio Adapters
+ 2021/01/24 11:21:18 NAA output connect to 192.168.1.105:43210 [ipv4]
  2021/01/24 11:21:18 NAA output network format: 44100/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 48000/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 88200/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 96000/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 176400/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 192000/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 352800/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 384000/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 705600/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 768000/32/2 [pcm] 
  2021/01/24 11:21:18 NAA output network format: 2822400/1/2 [dsd] 
  2021/01/24 11:21:18 NAA output network format: 3072000/1/2 [dsd] 
  2021/01/24 11:21:18 NAA output network format: 5644800/1/2 [dsd] 
  2021/01/24 11:21:18 NAA output network format: 6144000/1/2 [dsd] 
  2021/01/24 11:21:18 NAA output network format: 11289600/1/2 [dsd] 
  2021/01/24 11:21:18 NAA output network format: 12288000/1/2 [dsd] 
  2021/01/24 11:21:18 NAA output network format: 22579200/1/2 [dsd] 
  2021/01/24 11:21:18 NAA output network format: 24576000/1/2 [dsd] 
  2021/01/24 11:21:36 Web configuration written
% 2021/01/24 11:21:38 Reloading configuration...

  2021/01/24 11:21:38 asoundlib version: 1.2.2
  2021/01/24 11:21:38 Found ALSA device: hw:CARD=PCH,DEV=0 - HDA Intel PCH: ALC3234 Analog
  2021/01/24 11:21:39 Found ALSA device: hw:CARD=NVidia,DEV=3 - HDA NVidia: HDMI 0
  2021/01/24 11:21:39 Found ALSA device: hw:CARD=NVidia,DEV=7 - HDA NVidia: HDMI 1
  2021/01/24 11:21:39 Found ALSA device: hw:CARD=NVidia,DEV=8 - HDA NVidia: HDMI 2
  2021/01/24 11:21:39 Found ALSA device: hw:CARD=NVidia,DEV=9 - HDA NVidia: HDMI 3
  2021/01/24 11:21:39 Found ALSA device: hw:CARD=NVidia,DEV=10 - HDA NVidia: HDMI 4
  2021/01/24 11:21:39 Found ALSA device: hw:CARD=NVidia,DEV=11 - HDA NVidia: HDMI 5
  2021/01/24 11:21:39 Found ALSA device: hw:CARD=NVidia,DEV=12 - HDA NVidia: HDMI 6
  2021/01/24 11:21:39  network Audio IPv6 support enabled
  2021/01/24 11:21:39  discovery from 0.0.0.0
& 2021/01/24 11:21:39  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:21:39  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:21:39  discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
& 2021/01/24 11:21:39  discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
  2021/01/24 11:21:40  discovery from ::
& 2021/01/24 11:21:40  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/24 11:21:40  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/24 11:21:41  connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:21:41  network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:21:41  connect to 192.168.1.31:43210 [ipv4]
  2021/01/24 11:21:41  network endpoint: Pre Box S2 Digital: USB Audio (hw:CARD=Digital,DEV=0)
  2021/01/24 11:21:41  network endpoint: HDA Intel PCH: ALC283 Analog (hw:CARD=PCH,DEV=0)
  2021/01/24 11:21:41  network endpoint: HDA Intel PCH: ALC283 Digital (hw:CARD=PCH,DEV=1)
  2021/01/24 11:21:41  network endpoint: HDA Intel PCH: HDMI 4 (hw:CARD=PCH,DEV=10)
  2021/01/24 11:21:41  network endpoint: HDA Intel PCH: HDMI 0 (hw:CARD=PCH,DEV=3)
  2021/01/24 11:21:41  network endpoint: HDA Intel PCH: HDMI 1 (hw:CARD=PCH,DEV=7)
  2021/01/24 11:21:41  network endpoint: HDA Intel PCH: HDMI 2 (hw:CARD=PCH,DEV=8)
  2021/01/24 11:21:41  network endpoint: HDA Intel PCH: HDMI 3 (hw:CARD=PCH,DEV=9)
  2021/01/24 11:21:41 CUDA offload requested
  2021/01/24 11:21:41 libDSP version 21.14.0
  2021/01/24 11:21:41 HQPlayer Engine version 4.36.4
  2021/01/24 11:21:41 CUDA offload: all
  2021/01/24 11:21:41 Number of processor cores: 8
  2021/01/24 11:21:41 Core mask: 0000000000000000000000000000000000000000000000000000000011111111
  2021/01/24 11:21:41 CPU brand name: GenuineIntel
  2021/01/24 11:21:41 Core pinning enabled
  2021/01/24 11:21:41 Pool mask: 0000000000000000000000000000000000000000000000001111111100000000
  2021/01/24 11:21:41 Pool: {8,9,10,11,12,13,14,15}
  2021/01/24 11:21:41 Initial parallel threads: 16
  2021/01/24 11:21:41 Number of logical cores: 16
  2021/01/24 11:21:41 DSP thread pools enabled (3)
  2021/01/24 11:21:41 DSP pipelines disabled
  2021/01/24 11:21:41 Pipelined engine enabled
  2021/01/24 11:21:41 DirectSDM disabled
  2021/01/24 11:21:41 Audio engine: network
  2021/01/24 11:21:41 Input set channels: 2 (2)
  2021/01/24 11:21:41 Input supports DSD with any base rate
  2021/01/24 11:21:41 Input set channels: 2 (2)
  2021/01/24 11:21:41 Normal buffers
  2021/01/24 11:21:41 Hardware volume control disabled
  2021/01/24 11:21:41 Adaptive volume control disabled
  2021/01/24 11:21:41 Volume max: 0
  2021/01/24 11:21:41 Volume min: -60
  2021/01/24 11:21:41 Volume scaler: 0.75
  2021/01/24 11:21:41 Set volume: -6 +
  2021/01/24 11:21:41 NAA output network Audio IPv6 support enabled
  2021/01/24 11:21:41 NAA output discovery from 0.0.0.0
  2021/01/24 11:21:41 Automatic rate family disabled
  2021/01/24 11:21:41 Full pause processing
& 2021/01/24 11:21:41 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:21:41 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/24 11:21:41 NAA output discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
& 2021/01/24 11:21:41 NAA output discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
  2021/01/24 11:21:41 SDM conversion parameters (8, 0)
  2021/01/24 11:21:41 DSD 6 dB gain enabled
& 2021/01/24 11:21:41 Set transport (240): 
  2021/01/24 11:21:41 Set filter: 26 / 24
  2021/01/24 11:21:41 Set dither: 5
  2021/01/24 11:21:41 Set oversampling: 23 / 23
  2021/01/24 11:21:41 Set modulator: 11
  2021/01/24 11:21:41 Audio engine is normal
  2021/01/24 11:21:41 IntegratorM: IIR
  2021/01/24 11:21:41 Audio engine SDM mode enabled
  2021/01/24 11:21:41 Requested output rate: 12288000
  2021/01/24 11:21:41 NAA output set sampling rate: 12288000 (12288000)
  2021/01/24 11:21:41 Automatic output rate switching enabled
& 2021/01/24 11:21:41 Convolution disabled
  2021/01/24 11:21:41 Control active volume range: -60 - 0 dB
  2021/01/24 11:21:41 Listen discovery on ::
  2021/01/24 11:21:41 Listen discovery on 0.0.0.0
  2021/01/24 11:21:41 Enable UPnP Renderer functionality for interface: auto
  2021/01/24 11:21:41 Adding interface 'eno1' for UPnP Renderer
  2021/01/24 11:21:41 Adding interface 'eth100g0' for UPnP Renderer
  2021/01/24 11:21:41 Adding interface 'eth100g1' for UPnP Renderer
% 2021/01/24 11:21:41 ...configuration reloaded
  2021/01/24 11:21:42 NAA output discovery from ::
& 2021/01/24 11:21:42 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/24 11:21:42 NAA output discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/24 11:21:43 NAA output connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/24 11:21:43 NAA output network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/24 11:21:43 NAA output connect to 192.168.1.31:43210 [ipv4]
  2021/01/24 11:21:43 NAA output network endpoint: Pre Box S2 Digital: USB Audio (hw:CARD=Digital,DEV=0)
  2021/01/24 11:21:43 NAA output network endpoint: HDA Intel PCH: ALC283 Analog (hw:CARD=PCH,DEV=0)
  2021/01/24 11:21:43 NAA output network endpoint: HDA Intel PCH: ALC283 Digital (hw:CARD=PCH,DEV=1)
  2021/01/24 11:21:43 NAA output network endpoint: HDA Intel PCH: HDMI 4 (hw:CARD=PCH,DEV=10)
  2021/01/24 11:21:43 NAA output network endpoint: HDA Intel PCH: HDMI 0 (hw:CARD=PCH,DEV=3)
  2021/01/24 11:21:43 NAA output network endpoint: HDA Intel PCH: HDMI 1 (hw:CARD=PCH,DEV=7)
  2021/01/24 11:21:43 NAA output network endpoint: HDA Intel PCH: HDMI 2 (hw:CARD=PCH,DEV=8)
  2021/01/24 11:21:43 NAA output network endpoint: HDA Intel PCH: HDMI 3 (hw:CARD=PCH,DEV=9)
  2021/01/24 11:21:43 NAA output discovered 2 Network Audio Adapters
+ 2021/01/24 11:21:43 NAA output connect to 192.168.1.31:43210 [ipv4]
  2021/01/24 11:21:43 NAA output network format: 44100/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 48000/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 88200/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 96000/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 176400/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 192000/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 352800/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 384000/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 705600/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 768000/32/2 [pcm] 
  2021/01/24 11:21:43 NAA output network format: 2822400/1/2 [dsd] 
  2021/01/24 11:21:43 NAA output network format: 3072000/1/2 [dsd] 
  2021/01/24 11:21:43 NAA output network format: 5644800/1/2 [dsd] 
  2021/01/24 11:21:43 NAA output network format: 6144000/1/2 [dsd] 
  2021/01/24 11:21:43 NAA output network format: 11289600/1/2 [dsd] 
  2021/01/24 11:21:43 NAA output network format: 12288000/1/2 [dsd] 
  2021/01/24 11:21:43 NAA output network format: 22579200/1/2 [dsd] 
  2021/01/24 11:21:43 NAA output network format: 24576000/1/2 [dsd]

 

Custom room treatments for headphone users.

Link to comment
Miska

Miska

Posted
Posted
1 hour ago, jabbr said:

Ok now I think it has to do with IPV6 vs IPV4 discovery.

 

My wired NAA "clearfogbase" always shows up and is always discovered by both IPV6 and IPV4 but my wireless NAA "jons-NUC" is only discovered by IPV4

 

I see you have multiple ethernet interfaces. Likely to do with multicast routing and multiple ethernet interfaces. This is the typical reason...

 

Signalyst - Developer of HQPlayer

Pulse & Fidelity - Software Defined Amplifiers

Link to comment
jabbr

jabbr

Posted
Posted
2 minutes ago, Miska said:

 

I see you have multiple ethernet interfaces. Likely to do with multicast routing and multiple ethernet interfaces. This is the typical reason...

 

Right, so can I specify which interface I want to use with HQplayer in hqplayerd.xml ?

Custom room treatments for headphone users.

Link to comment
Miska

Miska

Posted
Posted
42 minutes ago, jabbr said:

Right, so can I specify which interface I want to use with HQplayer in hqplayerd.xml ?

 

Yes, but you still have a problem to some extent, because your routing table can route range of IP's just one way. So just don't-do-it... (multi-homed setup) :D  Otherwise you should run multicast routing daemon and all the messy stuff involved.

 

Just do the network topology in correct way.

Signalyst - Developer of HQPlayer

Pulse & Fidelity - Software Defined Amplifiers

Link to comment
jabbr

jabbr

Posted
Posted
On 1/24/2021 at 1:00 PM, Miska said:

 

I see you have multiple ethernet interfaces. Likely to do with multicast routing and multiple ethernet interfaces. This is the typical reason...

 

I only have a single interface connected ... here is the discovery section: 

2021/01/25 16:30:44  network Audio IPv6 support enabled
  2021/01/25 16:30:44  discovery from 0.0.0.0
& 2021/01/25 16:30:44  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/25 16:30:44  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.105:43210
& 2021/01/25 16:30:44  discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
& 2021/01/25 16:30:44  discovered network audio: name='jon-NUC6CAYH' version='Signalyst Network Audio Daemon 4.1.1'  @192.168.1.31:43210
  2021/01/25 16:30:45  discovery from ::
& 2021/01/25 16:30:45  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[fe80::19f:aa3d:9ff7:e1cb%eth100g1]:43210
& 2021/01/25 16:30:45  discovered network audio: name='clearfogbase' version='Signalyst Network Audio Daemon 4.1.1'  @[2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210
  2021/01/25 16:30:46  connect to [2600:2b00:7447:7900:271d:ee63:3178:a9db]:43210 [ipv6]
  2021/01/25 16:30:46  network endpoint: iFi (by AMR) HD USB Audio: USB Audio (hw:CARD=Audio,DEV=0)
  2021/01/25 16:30:46  connect to 192.168.1.31:43210 [ipv4]

 

The wireless connected NUC does not show up in ipv6, perhaps the wireless router doesn't participate in ipv6 multicast?

Custom room treatments for headphone users.

Link to comment
asdf1000

asdf1000

Posted
Posted

Hi @Miska

 

I have a fanless Intel Atom Win10 (32bit) laptop that I tried running Windows NAA a few weeks ago, for my 10 channel Focusrite 18i20 Gen3 for DIY DSP speaker setup.

 

Running 32bit NAA had pops and I thought it was the fault of the fanless low powered laptop , which doesn't have RJ45 connector, had to use a driverless USB 2.0 to ethernet adapter. So I stopped using it.

 

But I saw in your recent HQP Embedded release there were NAA optimizations so i just tried loading HQP OS image on USB to test it out.

 

And now I have no pops playing to 32bit Win10 NAA. 

 

Based on what you optimised with Embedded , would you expect improvements with 32bit Windows NAA , like I am experiencing (no pops)?

 

Or am I imagining LOL

 

 

Link to comment
  • Popular Post
Miska

Miska

Posted
  • Popular Post
Posted
On 1/30/2021 at 3:54 PM, asdf1000 said:

Hi @Miska

 

I have a fanless Intel Atom Win10 (32bit) laptop that I tried running Windows NAA a few weeks ago, for my 10 channel Focusrite 18i20 Gen3 for DIY DSP speaker setup.

 

Running 32bit NAA had pops and I thought it was the fault of the fanless low powered laptop , which doesn't have RJ45 connector, had to use a driverless USB 2.0 to ethernet adapter. So I stopped using it.

 

But I saw in your recent HQP Embedded release there were NAA optimizations so i just tried loading HQP OS image on USB to test it out.

 

And now I have no pops playing to 32bit Win10 NAA. 

 

Based on what you optimised with Embedded , would you expect improvements with 32bit Windows NAA , like I am experiencing (no pops)?

 

Or am I imagining LOL

 

 

 

The optimizations increase pipelining and are supposed to allow HQPlayer to both keep the DSP threads more occupied with work, and also the network side more occupied with sending data to the NAA. Both sides having less waiting happening. This is especially beneficial on HQPlayer server that have higher number of CPU cores/threads. While really low core counts such as dual core without threading may actually suffer a bit. But overall, since number of CPU cores/threads keeps increasing, I considered it beneficial to make more use of those additional resources.

 

So yes, it can be real. If it makes such a big difference it is a definite plus.

 

Since the NAA side remains the same, it should work the same with the NAA OS image. However, if the NAA OS image behaves differently, then it has more to do with the OS kernel updates...

 

Signalyst - Developer of HQPlayer

Pulse & Fidelity - Software Defined Amplifiers

Link to comment
  • 2 weeks later...
asdf1000

asdf1000

Posted
Posted

Hi @Miska

 

Bought a new Mac Mini Intel i5 (Apple is still selling alongside M1) to trial while I also trial Anubis.

 

Still having issues with PCM192kHz with HQP OS (Ravenna version) -> Anubis. 96kHz is fine.

 

So now I reverted to HQP OS 4.22 normal version (not Ravenna) and trying macOS NAA... Hoping it would just be simple HQP OS -> macOS NAA -> Anubis

 

Note that this is using built-in gigabit ethernet of the Mac Mini - no USB-to-ethernet adapters !

 

I have these issues:

1889127008_ScreenShot2021-02-13at3_01_39pm.thumb.png.1c25e0af4e183e6d581ae7e943fbdc0c.png

 

And when I run this line in Terminal like you suggested previous time I had issues with macOS NAA, this is what I get and nothing shows on HQP OS Config page:

1507155655_ScreenShot2021-02-13at2_56_00pm.thumb.png.1bab45357f71075f5a33bda0f9ae1937.png

 

 

 

Any suggestions of things to try?

 

 

image.png.fc09d50db7139c3da4bb84e012dc6a73.png

 

image.png.ec981dc54f22960f0c22ab37c8d42174.png

Link to comment
asdf1000

asdf1000

Posted
Posted
8 minutes ago, Miska said:

 

Yes... On newer macOS versions you need to run it with root privileges, so through for example "sudo ./networkaudiod".

 

Reason is that it doesn't have GUI, so it cannot trigger the OS prompt for audio device and network access.

 

 

 

Thanks @Miska !

 

Now having it working :-)

 

So using normal HQP OS, I can now see Ravenna driver, but each time I select and 'apply', it doesn't stick ! It goes to another CoreAudio device.

 

Should I instead use the Ravenna version of HQP OS now , with macOS NAA?

 

Or the normal version of HQP OS should work now ?

 

image.thumb.png.588662b03257b3e024fabb904b6d99a5.png

Link to comment
Miska

Miska

Posted
Posted
8 hours ago, asdf1000 said:

Should I instead use the Ravenna version of HQP OS now , with macOS NAA?

 

Or the normal version of HQP OS should work now ?

 

When you use NAA output, you should always use the regular version. RAVENNA version is only when you want to directly output to RAVENNA without a NAA.

 

Signalyst - Developer of HQPlayer

Pulse & Fidelity - Software Defined Amplifiers

Link to comment
asdf1000

asdf1000

Posted
Posted
5 hours ago, Miska said:

 

When you use NAA output, you should always use the regular version. RAVENNA version is only when you want to directly output to RAVENNA without a NAA.

 

 

Ok thanks, now that I got macOS NAA working with CoreAudio i'll try normal HQP OS version

 

And hopefully UAC2 input works like normal

 

Link to comment
asdf1000

asdf1000

Posted
Posted
7 hours ago, Miska said:

 

When you use NAA output, you should always use the regular version. RAVENNA version is only when you want to directly output to RAVENNA without a NAA.

 

 

Running normal HQP OS 4.22 now. 

 

macOS NAA is working for all my CoreAudio drivers, except Ravenna.

 

It refuses to 'stick' when I select it from Network Backend options and hit apply. Other CoreAudio devices work fine as NAA.

 

image.thumb.png.40e077a3da60a545ae21fb9b39e38a04.png

Link to comment
Miska

Miska

Posted
Posted
3 hours ago, asdf1000 said:

Hi @Miska

 

Any idea why CoreAudio Ravenna driver won't stick when I select it and hit apply? Using regular HQP OS 4.22 version and macOS NAA.

 

Is this something you can reproduce at your end?

 

Anything I can try to get this working ?

 

I don't know, at least the NAA output looks fine. You could check if HQPlayer log has some erorrs and you could check the configuration file if the correct value ends up there.

Signalyst - Developer of HQPlayer

Pulse & Fidelity - Software Defined Amplifiers

Link to comment
asdf1000

asdf1000

Posted
Posted
On 2/15/2021 at 11:40 PM, Miska said:

 

I don't know, at least the NAA output looks fine. You could check if HQPlayer log has some erorrs and you could check the configuration file if the correct value ends up there.

 

I tried so many things. I think I have to give up with HQP OS with Anubis.

 

Ravenna version of HQP OS doesn't work without pops at 192kHz.

 

And with regular version I can't choose CoreAudio Ravenna driver. I can see it but it won't stick.

 

I'll have to use Roon for upsampling to Anubis and maybe revisit later if there's any changes to HQP OS in future that might help. Or with macOS NAA

 

HQP Desktop on the same Mac works fine with Core Audio Ravenna driver. But I already have 2 Embedded licenses.

 

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go to topic listing


sonore

aurender

Lumin

HEAP

Schiit

SOtM

Mytek

mutec

uptone

jcat

sotm usa

audioquest

Taiko Audio

Teddy Pardo

Eversolo




×
×
  • Create New...