Jacky820 Posted January 15, 2020 Share Posted January 15, 2020 Dear all, may I know how to config the fix IP address for the Pi4 NNA? https://www.signalyst.eu/bins/naa/images/naa-3601-raspberrypi4.7z I am working good with Windows 2019 and Pi4 NNA, hence I want to connect the HQPlayer and NNA with a single network cable rather with network switch with DHCP> thanks, Jacky Link to comment
Jacky820 Posted January 15, 2020 Share Posted January 15, 2020 3 hours ago, Miska said: This kind of setup usually doesn't work due to multicast routing challenges, it is not recommended. NAA is intended for use in regular switched home network and there is no advantage in using direct connection, but instead some negative sides. Thank you Miska. Could you please let me know how can login to the console for pi4 NNA? Link to comment
Jacky820 Posted January 15, 2020 Share Posted January 15, 2020 15 minutes ago, Miska said: You can login as "root", no password. Thank you Miska, I tried with ssh and web port 80 but fail, could you please share with me which port I should use for the connection? Link to comment
Jacky820 Posted January 16, 2020 Share Posted January 16, 2020 4 hours ago, Miska said: There is no ssh for security reasons (default passwords are bad), only console login. So you need to connect HDMI monitor and USB keyboard to login on console. My bad! Let’s me try it tonight☺️ Link to comment
Jacky820 Posted January 29, 2020 Share Posted January 29, 2020 Dear Miska, May I know which approach is best SQ in HQPlayer with NNA? Thanks for the NNA 4.0 for Pi4! Link to comment
Jacky820 Posted January 29, 2020 Share Posted January 29, 2020 1 hour ago, Miska said: The lower, blue one... That is a network. The upper one is not and has tons of problems. Thanks for your quick response 😘 will go ahead for the LT3045 with battery module for su1 and 5ports 5V network switch! Link to comment
Jacky820 Posted February 1, 2020 Share Posted February 1, 2020 tried few MicroSD card for Pi4 with NNA4 The Toshiba one is much solid... Please feel free to share your setup for the better SQ! Link to comment
Jacky820 Posted February 22, 2020 Share Posted February 22, 2020 I am using pi4B With NNA4.01, I found that the temperature of 4.01 is higher than 4.0 and 3.6! the SQ will be 4.01 >> 3.6 >> 4.0 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now