Output :Voltage RMS :29 Volts 20Hz to 20kHz, one channel loadedPeak :82 VoltsPower :105 Watts one channel into 8 Ohms (20dBW),141 Watts one channel into 4 OhmsPeak-to-peak output current :50 AmpsDamping factor :80Output devices per channel :4Pre-output impedance :50 OhmsLine inputs :Total harmonic distortion + noise :< 0.01% 20Hz to 20kHzSignal / noise ratio :> 98dB ‘A’-weightedInput sensitivity for 105Watts, 8 Ohms :250mVInput impedance :220k OhmsOverload margin :26dBChannel separation :> 70dB typicalFrequency response :20Hz to 20kHz, + 0, - 0.2dBPhono input :Frequency response referenceIEC RIAA - see graph . . .Signal / noise ratio :> 94dB ‘A’-weightedInput sensitivity :2.5mV Moving MagnetInput impedance :47k OhmsOverload margin :24dBInput facilities :3 pairs line level RCA connectors,1 pair phono RCA connectorsOutput facilities :2 amplifier channels via 1 pair per channel binding posts.1 pair RCA audio outputs controlled by the volume,1 pair RCA tape record fixed line level output.Power requirement :100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),320 Watts maximum into 8 Ohms, 32 Watts idleDimensions :218mm, 8.6 inches wide98mm, 3.8 inches high (including feet)377mm, 14.9 inches deep(including knob and rear terminals)Weight :6.5 kg, 14.3 lbs unit only, unboxed8 kg, 17.7 lbs in shipping cartonStandard accessories :IEC type mains lead (10-Amp), remote control,2 batteries size LR03 or AAA, manganese alkaline t
Includes box, remote, MM phono