Jump to content
  • KenRW
    KenRW

    SOtM sNH-10G Network Switch Review

    Editor's Note: From time to time we publish reviews of controversial products. Audiophile network switches fall into this category without question. We welcome all comments in the comment section below the review as long as they are respectful and not personal. - Chris

     

     

     

    Do network switches make an audible improvement?

     


    Key Features

    • Designed for high end network audio
    • Specially designed Ethernet noise filter
    • Support 10, 100, 1G ethernet
    • 8 x RJ-45 ports
    • 2 x SFP ports
    • LED indicator on/off function
    • sCLK-EX High End clock module
    • 10MHz master clock input
    • Wide range of power input (6.5v ~ 12v)

     

     

     

    sNH-10G_1.jpg

     

     

    Pricing starts at $800 for the plain Jane model, $1500 with sCLK-EX clock board and the full blown $1700 with sCLK-EX clock board and master clock input with your choice of 50 Ohm or 75 Ohm connector.  The difference between the sms-200 and sms-200 Ultra is the addition of the sCLK-EX board.  The sNH-10G tested here included this sCLK-EX board, maybe this should be called the sNH-10G Ultra?  I did not have the plain Jane model to compare.

     

    The fit and finish of the switch is top notch.  It is apparent that a lot of design work went into the aesthetics of the unit (such as the melodious grill work on the top plate), after all a $800+ product should look like it’s worth $800+.  The design and manufacture of the unit was all done in house.  This is not just a modified consumer switch with added clock and filters.  My unit arrived with an sPS-500 power supply and DC cable along with a dCBL-CAT7 ethernet cable.

     

    I am a believer that every component can potentially impact the sound quality for good  or bad.  On hand I have an older Linksys EG008W 8 port consumer switch powered by an LH Labs LPS-1 and an Aqvox Switch-8 powered by an iFi 9 V power supply.  The differences in price and performance was readily apparent. 

     

     


    Q&A with May Park from SoTM

     

    sNH-10G_5.jpgQ : When was the development started and completed?
    A : It was started at the end of 2017 and completed around Sep of  2018.

     

    Q : How was it invented? Even though there are many routers and switches already available?
    A : Because we’ve experienced sound quality differences by the different network devices but there was nothing to fulfill the quality of sound, so we started development for audio equipment. 

     

    Q : What is the benefit of using sNH-10G into the system?
    A : As for the audio equipment, the most important factor is sound quality. Also it has the optical ports and LED on/off feature.

     

    Q :What is the technical background of sNH-10G?
    A : All SOtM products have their own unique technical points. The sNH-10G is for the network audio device, every LAN port has filtering technology, which improves sound quality dramatically and this filtering technology has also been applied to the iSO-CAT6. 


    The noise coming from the Ethernet signal has a very wide frequency band. In order to eliminate this wide frequency band, we've created various parts corresponding to the noise of each frequency and then combining them to became the broadband noise filter. This filter is already applied to iSO-CAT6 and is also used in sNH-10G.


    Also, ultra low noise regulator, active noise canceller for clock and selectable audio components are used, and all such combination is well synergized to make better sound quality in the audio system.  All SOtM products have their own unique technical points. The sNH-10G is for all network audio devices, every LAN port has filtering technology, which improves sound quality dramatically and this filtering technology has also been applied to the iSO-CAT6. 


    The noise coming from the Ethernet signal have a very wide frequency band. In order to eliminate this wide frequency band noise, we've selected various parts corresponding to the noise frequency band  and then combined them to become the wide band noise filter.


    Also,  ultra low noise regulator, active noise canceller for clock and specially selected audio grade components are used, and all such combination is well synergized to make much better sound quality in the audio system. 


    Q : What is difference between the other network ethernet switch in the market and the sNH-10G?
    A: The difference is about the sound quality and it’s very real factor which is why the sNH-10G has been developed even though other vendors are also developing network switches. 

     

    Q : How to use the optical ports? What is the benefits of the ports?
    A : The SFP ports on sNH-10G can also bring benefits from the filtering feature which were explained on above. But we recommend using RJ45 ports with the good quality network cable like dCBL-CAT7 & iSO-CAT6 combination over using the optical ports, because the connection with RJ45 and dCBL-CAT7&iSO-CAT6 could bring the better sound quality than SFP ports.

     

    Q : What is the switch on the back panel?
    A : There are 3 steps of the switch, it controls the LED power on/off. When it is positioned to be up, the led is on and power is on. When it is in the middle, the unit will be off, when it is in down, the LED is off but still the unit works. 

     

    Q : Why recommend using the dCBL-CAT7 and iSO-CAT6 even though the sNH-10G is used already?
    A : There would be no single product which removes noise completely, but they can help reduce noise and improve sound quality, so even though the sNH-10G and iSO-CAT6 have good quality filtering technology on their own, if they can be used together , the synergy is better than using only one filter and brings better results. There is no single product which removes noise completely, even though the product are good at reducing noise so it improves sound quality, it doesn’t mean that the products remove noise completely. But well designed audio products like sNH-10G and SOtM’s other products reduce noise and help to improve sound quality.

     

     

    sNH-10G_3.jpg

     


    Set Up

     

    My music network is very flat and simple.
    TELUS ISP Fiber Modem
    SoTM sNH-10G
    Netgear Duo V2
    (WD Red 4 TB RAID 0)
    Asus Vivobook (Anker Unibody USB Ethernet USB Hub)
    (Windows10 Pro, Fidelizer 8.2, AudiophileOptimizer, Bridged Ethernet Ports)
    SoTM sms-200 Ultra SE
    LH Labs Pulse X Infinity
    (LPS4)
    Reference Line Preeminence 1B Passive
    Sonic Frontiers Power 2
    Totem Mani-2 
    Fostex TX-00 Purplehearts

     

     

    Listening  

    The recommended burn in time for the sNH-10G is 50 hours but after initially setting up the unit, I could tell something special was going on.  The noise filtering technology really does what SoTM claims.  The device was powered with SoTM’s SPS-500 SMPS power supply.


    I did not have access to any fiber networking connections.  May Park from SoTM recommended I test with RJ45 cable which is what I did.

     

    On the back, you will notice a small 3 position switch.  Its function is an LED ON/OFF switch with the middle position powering off the switch.  Under close listening there is a slight improvement in sound quality with LED off.  The difference is very slight and at first I needed headphones to discern the small improvement.

     

    First up I connected the Aqvox Switch-8 listened to each track and then switched to the sNM-10G and made comparisons.  

     

     

    Here are my listening notes.

     

     

     

    godfather.jpgNino Rota | The Godfather Soundtrack Love Theme Released 1972 (24/192 FLAC)


    This is a very natural folk recording with traditional Italian roots.  Sweeping and romantic with a touch of bite.  The most apparent difference here is the microdynamics and detail resolution.  Instruments suddenly became more interesting and the music became more involving, at the same time more relaxed with an ease and flow which made the music more natural.

     

     

     

    q@2x.png  Listen via Qobuz (24/96) 

    T.png Listen via Tidal (16/44.1) 

    H.png Purchase via HDtracks (24/96 or 24/192)

     

     

     

     

     

    bc-Meghan-Andrews_Im-On-Fire_Cover.jpgMeghan Andrews | I’m on Fire (Single) 2018 Blue Coast Music (DSD128)| 


    Bruce Springsteen’s classic cover by Meghan Andrews.  This is a single available on Blue Coast Music.  You can download this in various formats, FLAC, DSD and WAV for your own comparison.  I used the DSD128 version.  A very spare acoustic voice and guitar recording.  Most apparent here is the guitar seemed to have more wood and body as compared to more strings with the Aqvox.  The voice had slightly more chest as compared to more throat.

     

     

    bc-logo.jpg  Purchase from Blue Coast (multiple formats)

     

     

     

     

     

    mad.jpg

    Mad Season | River of Deceit Above 1995 (24/44)


    This test produced more interesting textures.  Layne Staley’s voice more falsetto.  Better bass texture and articulation and a slightly wider soundstage.

     

     

     

     

    q@2x.png  Listen via Qobuz (24/96) 

    T.png Listen via Tidal (16/44.1) 

    H.png Purchase via HDtracks (24/44.1)

     

     

     

     

     

     

     

    Metallica_black.jpgMetallica | Black Album Wherever I May Roam 1992 (24/96 FLAC)


    Using sitar- like guitar playing, the change brought about a more visceral and robust feel to James Hetfield's vocals yet at the same time the highs were more relaxed with a greater sense of ease to the flow of the song.  The same character as with earlier listening bringing about more interesting sustain to instruments and more decay in percussion.

     

     

     

    M@2x.png  Purchase from Metallica (24/48)

     

     

     

     

     

    vm.jpgVan Morrison | Poetic Champions Compose Spanish Steps 1987 16/44


    This is one of my desert island recordings.  I thought I would include a standard redbook recording. The difference here is more air.  The soundstage created slightly more image height.  Each instrument having more decay and sustain.  Already quite beautiful through the Aqvox, everything was just more there with the SoTM.

     

     

     

    q@2x.png  Listen via Qobuz (24/96) 

    T.png Listen via Tidal (16/44.1) 

     

     

     

     

     

    pm.jpg
    Pat Metheny | What It’s All About Betcha By Golly Wow 2011 24/96


    Another cover, this time Pat Metheny’s version of the Stylistics classic.  Here it was very close.  I have a redbook version of this recording and I can hardly tell the difference.  I had to use Fostex TX-00 Purpleheart headphones to detect just a slight bit more wood in the guitar and sustain in the notes.

     

     

    q@2x.png  Listen via Qobuz (24/96) 

    T.png Listen via Tidal (Lossy MQA) 

    H.png Purchase via HDtracks (24/96)

     

     


    Conclusion


    sNH-10G_2.jpgI have to declare that SoTM’s design goals of producing a good sounding switch by reducing noise has been a resounding success.  Musical textures are more interesting notes have more air and decay.  In some cases more image height and slightly deeper soundstage.  For fun I put in my old Netgear consumer switch.  I immediately had to take it out.  So here we have some careful considerations to make.  I can’t speak to the $1000 plain Jane sNH-10G but this upgraded version with the upgraded clock sounds much better than the 398 Euro (around $456 USD at time of writing) Aqvox Switch 8 which in turn sounds much better than a consumer Linksys switch.  Is it $1200 better?  That is hard to say.  Myself, I think this is a special product and worthy of consideration.

     

     

     

    Sneak preview

     

    double-switch.jpegMay Park just sent me a note.  Having done some internal testing they found that under this parallel  configuration there was a dramatic sonic improvement.

     

     

     


    Stay tuned.

     

    Ken

     

     

     

     

     

    Additional Information:

     

    Manufacturer: SOtM

    Product: sNH-10G Network Switch ($800+)

     

    Where to Buy:

     

    US Customers - Crux Audio / SOtM USA

    International Customers - SOtM

     

     




    User Feedback

    Recommended Comments



    I’m all for having an open mind and exploring different views, but there is a point where things become absurd, and this review in my view went well past that point. Glad to know Chis was not the author. 

    Share this comment


    Link to comment
    Share on other sites

    1 minute ago, pga said:

    I’m all for having an open mind and exploring different views, but there is a point where things become absurd, and this review in my view went well past that point. Glad to know Chis was not the author. 

     

    ‘Why? You tried it and it did not work for you? Or you just KNOW?

    Share this comment


    Link to comment
    Share on other sites

    9 hours ago, thyname said:

     

    ‘Why? You tried it and it did not work for you? Or you just KNOW?

    Agreed if @pga has not listened to this switch in his system, his opinion on it is worthless

    Share this comment


    Link to comment
    Share on other sites

    3 minutes ago, plissken said:

     

    How do you know this switch won't increase what shows in your online banking account when you go to check it?

     

    I mean you haven't tried it. Maybe you need to order one of every switch currently made and check your bank account statements. Because one never knows, riiiiight?

     

    ‘What a dumb ass logic 😬

    Share this comment


    Link to comment
    Share on other sites

    26 minutes ago, thyname said:

     

    ‘What a dumb ass logic 😬

     

    How so? You haven't tried it. I mean it worked for me....

     

    Or are you suddenly an expert on how IP data networks....work?

    Share this comment


    Link to comment
    Share on other sites

    32 minutes ago, plissken said:

     

    How so? You haven't tried it. I mean it worked for me....

     

    Or are you suddenly an expert on how IP data networks....work?

     

    ‘Because yours is simply stupid comment. Nothing to do with IP data network. Even less (if there is less than nothing) with Audio.

     

    Have you tried it? Or you just KNOW? As an audio expert. 

    Share this comment


    Link to comment
    Share on other sites

    I watch a lot of 1080P movies that I have ripped to H 264 and stream from my NAS.

     

    What is the best model of switch that will increase my picture quality, better color microdynamics, and better resolution and detail.

    Share this comment


    Link to comment
    Share on other sites

    Just now, plissken said:

    I watch a lot of 1080P movies that I have ripped to H 264 and stream from my NAS.

     

    What is the best model of switch that will increase my picture quality, better color microdynamics, and better resolution and detail.

     

    ‘Buy a better / bigger TV?

    Share this comment


    Link to comment
    Share on other sites

    3 minutes ago, thyname said:

     

    ‘Buy a better / bigger TV?

     

    I already have a 106" Projection Screen  So what switch is going to improve my PQ?

    Share this comment


    Link to comment
    Share on other sites

    2 minutes ago, plissken said:

     

    I already have a 106" Projection Screen  So what switch is going to improve my PQ?

     

    I don’t know man. I am not watching TV wth you. Figure it out for yourself 

    Share this comment


    Link to comment
    Share on other sites

    16 minutes ago, thyname said:

     

    I don’t know man. I am not watching TV wth you. Figure it out for yourself 

     

    Sorry, my mistake, I thought you had all the answers for everyone else.

    Share this comment


    Link to comment
    Share on other sites

    15 minutes ago, plissken said:

     

    Sorry, my mistake, I thought you had all the answers for everyone else.

     

    ‘Never claimed that. Unlike you

    Share this comment


    Link to comment
    Share on other sites

    8 hours ago, plissken said:

    I watch a lot of 1080P movies that I have ripped to H 264 and stream from my NAS.

     

    What is the best model of switch that will increase my picture quality, better color microdynamics, and better resolution and detail.

    Actually I found that the Aqvox switch enhanced picture quality using one of their ethernet cables to my Roku straight from the switch. Noticeable upgrade in contrast and clarity on my 4K TV. I have an HDMI cable to recommend to you as well - a minimalist HDMI cable made by Mapleshade. Not too expensive as this hobby goes. Try it. Try any of this stuff. It just might open your eyes. And your ears. (And there are whole discussions about enhancing digital picture quality with better switches and ethernet cables which I assume you've never searched for - then again I have the funny feeling yours is not a real question - at least not one without your tongue planted firmly in your cheek. But I always try to answer in earnest, regardless.)

    Share this comment


    Link to comment
    Share on other sites

    Have not tried the SOtM switch in this capacity yet but I plan to test it there as well.

    Share this comment


    Link to comment
    Share on other sites

    11 hours ago, incus said:

    Actually I found that the Aqvox switch enhanced picture quality using one of their ethernet cables to my Roku straight from the switch. Noticeable upgrade in contrast and clarity on my 4K TV.

     

    Really, the contrast actually changed?

    Share this comment


    Link to comment
    Share on other sites

    Quote

    Actually I found that the Aqvox switch enhanced picture quality using one of their ethernet cables to my Roku straight from the switch. Noticeable upgrade in contrast and clarity on my 4K TV. I have an HDMI cable to recommend to you as well

     

    The only way you can adjust the 'contrast and clarity' on your tv is with the button labelled 'picture' or 'menu' on your TV.  Neither an ethernet connection nor an HDMI cable can do that

     

    As there can not possibly be a difference in the bitstream being received by the Roku by wireless or ethernet,  Roku devices no longer have ethernet ports on their devices in the UK. Maybe we are embracing the 21st Century

     

    A Roku will automatically adjust the video resolution should your internet connection drop speed.

     

    My setup is a £50 ($66) router, Roku Streaming stick £60 ($80) and a very expensive 4K TV with perfect picture of the resolution decided by Netflix and the BBC, etc and with the 'contrast and clarity' decided by my adjusting it with the remote control

    Share this comment


    Link to comment
    Share on other sites

    On 3/19/2019 at 3:56 AM, DonaldT2109 said:

     

    The only way you can adjust the 'contrast and clarity' on your tv is with the button labelled 'picture' or 'menu' on your TV.  Neither an ethernet connection nor an HDMI cable can do that

     

    As there can not possibly be a difference in the bitstream being received by the Roku by wireless or ethernet,  Roku devices no longer have ethernet ports on their devices in the UK. Maybe we are embracing the 21st Century

     

    A Roku will automatically adjust the video reolution should your internet connection drop speed.

     

    My setup is a £50 ($66) router, Roku Streaming stick £60 ($80) and a very expensive 4K TV with perfect picture of the resolution decided by Netflix and the BBC, etc and with the 'contrast and clarity' decided by my adjusting it with the remote control

    And yet the switch did do this... As did the cable... Hm... I'm sorry you feel the need to dismiss my experience so dogmatically... Not sure what else I can say... My eyes are as delusional as my ears I guess...? Anyway I would ask if you have ever tried either of the products that I mention but I'm certain the answer is no so until you have I will kindly ask you to STFU.

    14 hours ago, Nsummy said:

    Anyone who thinks a switch can make audio sound better does not understand networking. The digital sound files and 1s and 0s.  The switch relays these packets. This is like claiming that digital photos look better if transmitted over a certain switch.

    Ah now there you couldn't be more wrong. A photo is static. Streaming music is temporal. That is the heart of the issue. We are talking about timing issues here. The "bitstream" and the "1's and 0's" you and your cohorts are so keen on claiming are incorruptible are actually quite susceptible to various kinds of timing errors that present as jitter and effect the conversion to analogue. And I will kindly refer you to the suggestion above if you have not heard the product in question.

    Share this comment


    Link to comment
    Share on other sites

    On 3/19/2019 at 6:56 AM, DonaldT2109 said:

     

    The only way you can adjust the 'contrast and clarity' on your tv is with the button labelled 'picture' or 'menu' on your TV.  Neither an ethernet connection nor an HDMI cable can do that

     

    As there can not possibly be a difference in the bitstream being received by the Roku by wireless or ethernet,  Roku devices no longer have ethernet ports on their devices in the UK. Maybe we are embracing the 21st Century

     

    A Roku will automatically adjust the video resolution should your internet connection drop speed.

     

    My setup is a £50 ($66) router, Roku Streaming stick £60 ($80) and a very expensive 4K TV with perfect picture of the resolution decided by Netflix and the BBC, etc and with the 'contrast and clarity' decided by my adjusting it with the remote control

    Sorry Donald, but  I bought 2 months ago a second hand switch from Cisco and the image from my Apple TV improved substancially. Also I am feeding my router with an HDPlex and Again I felt an improvement including on my other Apple TV connected wireless.

    Share this comment


    Link to comment
    Share on other sites

    This is/was an interesting read, albeit painful at times given the demeanor.  Unfortunate, really, for those legitimately trying to learn.

     

    Because I honestly don't know, can someone confirm whether or not ethernet cables/switches/connections are naturally susceptible to both RF and or ground loop issues?

    Share this comment


    Link to comment
    Share on other sites




    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now




×
×
  • Create New...