Jump to content
  • The Computer Audiophile
    The Computer Audiophile

    APL Hi-Fi DSD-MR DAC and DNP-SR Streamer Full Review

    A few months ago I received a message from a friend who is also a long time Audiophile Style reader @joelha. The message was about a new DAC that I just "had to hear." Not only that but it was from a Bulgarian company I'd never even heard of in all my audio travels and research. Oh great I thought, another DAC I just had to hear. Let me check my inbox for all the great DACs I just had to hear and put it in line to be looked at as soon as I have free time (never). 

     

    I have countless message from friends, colleagues, manufacturers, distributors, etc... about products I just "have to hear." This is a first world problem of the highest order, but it's a problem nonetheless. It's hard to find the signal in all the noise. When I decide to take a chance on one of these products, I have to get the whole story about the product and company and I must understand the motivation of the person recommending the product. My decision to bring the product in for review comes down to trust above anything else. I have to trust the person on the other end of the email/phone.  

     

    In this instance, I absolutely trusted the person who contacted me about products from APL Hi-Fi. I gave him the green light to help me get the products here for review. What follows is my review of the stunning DSD-MR digital to analog converter and DNP-SR Streamer.

     

     

     

    APL-Constellation-Transparent.jpg

     

     

     

     

    I'll start with the DSD-MR (DSD-Master Reference) DAC. It's nice when I can review components without first knowing too much about the price or the design. In this case I actually don't know how much the DSD-MR costs. I've been told it's expensive, but that's a relative term if there ever was one. As part of my purposeful ignorance I also didn't inquire about the design of the DAC until weeks after I'd received the unit. I wanted to put many hours of listening behind me before I asked APL Hi-Fi for additional information. Partly because I didn't want to be influenced by this information and partly because it's fun to listen and venture a guess as to what's going on inside that's contributing to the sound outside. 

     

    Let's skip the main course for now and get right to dessert. The APL Hi-Fi DSD-MR is one of the most unique sounding and enjoyable DACs I've ever heard. To eliminate any ambiguity, by enjoyable I mean one of the best I've ever heard. I don't write reviews that force people to read between lines. I say exactly what I mean. The APL Hi-Fi is one of the best DACs I've ever heard, and I've heard way more than I can count. From flagship to fledgling and everything in between, I've heard most of the offerings from most of the companies in the industry over the last ten years. I can conclude without a doubt the DSD-MR is in my top five and may be the most memorable of all. 

     

    I listened to every type of music in my collection through the DSD-MR. I'm sure many audiophiles can relate to getting a new piece of gear that's so good one just has to listen to "everything" to "see" how it sounds through component X or loudspeaker Y. From minute one with the DSD-MR I knew it was special. I can't think of another DAC that sounds like this one. The DSD-MR sounds more like analog tape and vinyl records than anything I've ever heard. Period.

     

    Listening to the entire Gary Karr: Bass Virtuoso album several times, I heard shades of the Schiit Yggdrasil through the DSD-MR, but only shades. I remember how much I loved the sound of this album through the Yggy, but the love and appreciation I have for this album now that I've spent so much time listening through the DSD-MR is much greater. Karr manages to pull every sonic attribute out of his double bass on this recording and it sounds so lush through the DSD-MR. I didn't think it was possible to hear a sip of sweetness, a bit of bloom, and delicate details simultaneously throughout the entire 40Hz to 400Hz frequency range of the double bass. They seem mutually exclusive until one spends time with the DSD-MR. 

     

    Track one on this album, named Sonata, reminds me of an Itzhak Perlman emotional rollercoaster. It's a winding road with ups and downs that are nothing but pleasure for the ears. Somehow the APL Hi-FI DSD-MR manages to squeeze more emotion out of this track than any other DAC I've heard. I know it may sound funny, but this is an emotional DAC. 

     

    Over the last couple months, I've sat down with a hot pot of black darjeeling tea and listened to entire albums, like Bass Virtuoso from Gary Karr, several times. The DSD-MR has figuratively pulled me into my listening chair more than any product in the last few years. The sweet sound from this DAC is like a drug of which I can't get enough. 

     

    Track three on Bass Virtuoso, Valse Miniature, demonstrates one attribute of the DSD-MR that I haven't heard in another product. I can describe this only as vibrancy without distractions. This recording is full of tape hiss and this hiss is clearly audible. It doesn't bother me in the least. In fact it lets me know I'm getting everything from the recording rather than getting only what some de-noising plugin let through as music. Now here's the twist, through the DSD-MR the vibrancy of Karr's double bass stands out so much from the noise that it's almost three dimensional. The tape noise is in the background and it nearly falls off my listening radar. I can't describe this as blacker blacks and a lower noise floor because I don't think that's what's going on here. For some wonderful reason the noise disappears and the music is seriously front and center. 

     

    I could write about the aforementioned recording with the DSD-MR until my fingers hurt, but it's probably better that I move on. Passacaglia performed by the Kansas City Orchestra and recorded by Keith Johnson for Reference Recordings is an "old" favorite of mine. This piece of music encapsulates a bit of everything when it comes to lows, highs, delicacy, transients, etc... and it demonstrates the best and the "worst" of the DSD-MR. When I say worst I mean one area where the DSD-MR is better than many DACs but not as good as some of the other great DACs. If anything, perhaps I hear a trade-off or design decision that must be made because every designer has to deal with engineering compromises. It's how these are handled that's key for the consumer. It should also be noted that other great DACs may best the DSD-MR in this category, but certainly not in other categories. 

     

    Readers should also note that what I hear is an incredibly small difference. I don't beat around the bush when describing what I hear. What follows is an exact description that doesn't force any reading between the lines. It should also be noted that to date, neither Alex Peychev nor any of his customers have heard the sonic qualities I describe below. Alex was surprised to read what I wrote. Last, don't blow this out of proportion.

     

    The opening several minutes of the track sound fantastic. The string section sounds like it's sweeping around the room with a vibrancy and eeriness that grabs one's attention. In typical Reference Recordings fashion there's a raw sound to it that places the listener right in the concert hall with the symphony. As horns come and go four minutes into the track the sound is spectacular. The shimmer of cymbals can be heard, starting delicate and gaining force before handing off to the eerie strings that slink in and take over. This is all delightful in a sonic sense. As the orchestra ramps up with bombastic drums and loud cymbal crashes, the sound loses a bit of of detail. At the 5:45 mark of this track, with a 26 R128 dynamic range score, the DSD-MR shows that the transients can cause it to round the edges ever so slightly and group some instruments together. Other flagship DACs reproduce these transients better than the DSD-MR, but those DACs definitely don't sound as sweet, vibrant, and emotional as the DSD-MR. I believe this is the design trade-off I can hear. 

     

     

    APL-Hi-Fi-DSD-MR-DNP-SR.jpg

     

     

     

     

    If readers haven't heard the new Norah Jones track Just A Little Bit from her forthcoming album Begin Again, I can't recommend enough that they take some time to give it a listen. I'm enamored by this track. In fact, if audiophiles wouldn't have burned out Norah's first album Come Away With Me and seared her voice into my brain, I'd like this new album even more. That's a personal issue though. 

     

    Just A Little Bit sounds spectacular through the DSD-MR. The track's deep and rhythmic bass foundation juxtaposed with Norah's smooth but cutting voice is a treat for the ears. I've listened to this album, and this track alone, several times per day since I discovered it last week. It's just so enjoyable to hear the aspects I just mentioned, but also the delicacy of the snare drum come through as pure as the driven snow. 

     

    I was inspired by this and other tracks from Begin Again to bring up Norah's previous album Day Breaks. It's a return to form for Norah Jones after stretching her creativity after the success of her debut album. A hidden gem on this album is a track named Flipside. It may not be everyone's cup of tea, but it has grown on me. Dr. Lonnie Smith's Hammond B3 can be heard throughout the track in the background and it's just such a sweet sound. Listening through the APL Hi-Fi DSD-MR enabled me to clearly pick out each element of this at times chaotic track. Even Norah's Wurlitzer is engaging and light and airy hi-hat brushing from Brian Blade is clearly audible if the listener wishes to pick up on it. 

     

    Picking up on things is something this DAC enables very well. What I mean is that the music is a whole just as the band plays it, but the DSD-MR has terrific separation of instruments and a vibrancy that brings instruments out into the room. It's as if the specific instrument one is listening for has a spotlight shone on it. I can't describe it any other way. 

     

    Quickly before moving on to the details of the DSD-MR and DNP-SR and how they work together incredibly well, I'll mention the album Moon Ray from Yoshio Otomo Quartet with Tsuyoshi Yamamoto. I have the JVC XRCD of the 1977 Three Blind Mice release. The second I pressed play on the first track I thought to myself, oh wow this is good. But when Otomo's saxophone kicked in a few seconds later I felt like I'd just received a shot of a potent painkiller. I melted in my listening chair and put my work on hold for the time being. This album and this DAC just can't be denied. 

     

     

    Details


    I hope that by now some readers get it. This DAC is special. After listening for weeks, I asked APL's Alex Peychev about the DACs architecture in an attempt to discern what makes it so special. Sure the sound is special, but I was interested in how Alex obtains this sound. After reading the first paragraph of Alex's response to me, my suspicions about his design philosophy were validated. 


    "The DSD-MR design is inspired by the sound quality of our reference Kuzma/Dynavector vinyl playback system. After many years and countless experiments, it was clear to me that DSD most closely approaches the sound of analog. We also performed similar tests using respected reel-to-reel machines to the same effect. Not that PCM cannot sound good, it does. But, managed properly, DSD produces a fatigue-free sound that is natural, smooth and effortless, just like pure analog."

     


    APL-Hi-Fi-DSD-MR-Tubes.jpgThis describes exactly 100% what I heard through the DSD-MR. This DAC is so analog, I'm willing to bet vinyl junkies could be tricked into thinking it was all analog, if it wasn't for the lack of pops and ticks. Heck, put on a vinyl rip and I'll put my money on this DAC fooling most of the people most of the time. 

     

    APL Hi-Fi obtains this sound by converting DSD to analog without altering the DSD data in any way and converting PCM to DSD128 or DSD256 (user selectable). The DSD-MR uses pure DSD filtration with linear-phase FIR filters and analog filters followed by a differential Class-A transformer-coupled tube output stage (using ECC99 tubes). The DSD-MR contains no OpAmps, discrete transistor stages, mechanical switches, coupling capacitors or negative feedback on the analog signal path. Instead, the DSD-MR uses custom audio transformers, wound with Oxygen Free Copper, made by Lundahl Transformers in Sweden. Both the analog domain DSD filter and tube output stages use those transformers.

     

     

    When the DAC receives PCM data it uses an FPGA-based PCM to DSD modulator for conversion. According to Peychev, "we have settled on two filters, both with 64 bit precision and linear phase. One is a slow rolloff and the other sharp rolloff. There is also a zero filter setting which completely eliminates the digital filters and provides the best impulse response. With this setting the DSD-MR achieves sound quality similar to non-oversampling DAC designs." I listened to the filters and settled on what's called the NORM filter for most of my listening but I really like the ZERO setting that bypasses digital filters as well. Both sounded wonderful and engaging. 


    Once the DSD-MR has the data in the DSD format, it uses Peychev's own design for digital to analog conversion. This isn't an R2R either. The actual DSD to Analog conversion is based on a linear phase FIR filter, followed by a passive filtering stage in the analog domain. I was unable to pull any additional information out of Alex about this design. I believe he wants to keep this design to himself and I don't blame him. For Alex it's all about getting as close to analog as possible and his own custom design was his way of getting there. 

     

     

    APL-Hi-Fi-DSD-MR.jpg

    The DSD-MR may be the heaviest DAC I've ever lifted. At 54 lbs it weighs nearly 20 lbs more than the dCS Vivaldi, and it has no volume control. The DAC has all the standard inputs such as AES, S/PDIF, TosLink and USB going to unbalanced RCA or balanced XLR outputs. What's different are the DTR inputs. According to APL, "DTR input uses proprietary encrypted DSD, as well as PCM via balanced LVDS transmission, similar to I2S." I tried all the inputs on the DSD-MR and found its DTR input to sound the best without question. I didn't want to believe it because I often think these proprietary inputs are a way of locking customers into using another component from the same manufacturer but, given the performance APL is getting from DTR, I have nothing but great things to day about it. 

     

     

     

    APL-DNP-SR.jpg

    This raises the question, how did I get a DTR capable signal? I used APL Hi-Fi's DNP-SR Streamer. This is a surprising product in many ways. It's the first product I know of that uses AURALiC's ARIES hardware and configuration software (if necessary). APL licensed the Auralic pieces rather than recreate the wheel and spend way more money than necessary. Very smart decision for a small company. The DNP-SR Streamer can be used as a Lightning endpoint supporting all the functionality of an Auralic Lightning device or it can be used as a Roon Ready endpoint. I used it in Roon mode for the entire review period. The DNP-SR Streamer ships from the factory in Roon mode and only requires the user plugin an Ethernet cable or connect via WiFi to start listening. 

     

     

     

    Of course APL didn't just take an ARIES and stick it in an expensive chassis. The DNP-SR is, according to Alex, "the only streamer in current existence to use absolutely 100% low-noise linear power."

     

    One more important note about the parts selection for the DSD-MR DAC, Alex is absolutely meticulous. Every part that goes into the DSD-MR is hand selected as only an audio perfectionist can do. Not only each model or version of the part, but the actual part that's placed in the DAC. To get the best sound, one has to inspect every part in a batch of parts rather than just plop them in the product. 

     

    There really isn't much to the setup or configuration of either the DNP-SR Streamer or DSD-MR DAC. They are simple devices designed to sound like analog HiFi. 

     

     

    Conclusion

     

    The APL Hi-Fi DSD-MR DAC is a unique product to say the least. It's unique in its design and sound quality. Its custom designed digital to analog conversion and FPGA PCM to DSD modulator are part of why the DSD-MR sounds the way it does. APL's Alex Peychev had a singular goal in mind when designing the DSD-MR, to get as close to analog as possible. Keeping control of everything going on inside the DAC is the only way to control everything coming out of the DAC. The sound emanating from the APL DSD-MR DAC is nothing short of stunning.  It's an amazing component that put my listening pleasure on a different level. Pure sonic enjoyment and blissful ignorance of the world around me is how to describe my mornings when I sat down with some fine tea and a favorite album or two or three. It's literally hard to stop listening when the DSD-MR is in one's system. 

     

    Feeding the DSD-MR with the APL Hi-Fi DNP-SR Streamer resulted in the best sound quality without question. Comparing this stellar sound to other DACs, I'd say it's much closer to that of dCS than Berkeley Audio Design. The APL DSD-MR isn't one of those DACs that will tear one's head off with sizzle or grate on one's ears after long periods of time. It's one of the most enjoyable DACs currently available and certainly the most memorable. It reproduces a sound I won't soon forget, much the same as I can't forget the sound of my first electrostatic loudspeakers. There's something about the APL Hi-Fi sound that's exceptional and seductive. The DSD-MR and DNP-SR combination has my highest recommendation.  

     

     

    APL Hi-FI Image Gallery
     

    APL-Constellation-Transparent.jpg APL-Hi-Fi-DSD-MR.jpg APL-DNP-SR.jpg APL-Hi-Fi-DSD-MR-DNP-SR.jpg APL-Hi-Fi-DSD-MR-Top.jpg APL-Hi-Fi-DSD-MR-Tubes.jpg APL-Hi-Fi-DSD-MR-Inside.jpg APL-Hi-Fi-DSD-MR-High-Voltage.jpg 

     

     

     

     

    Product Information:

     

     

    1-Pixel.png

     

     

    Associated Music:

     

     

     

     

    Associated Equipment:

     

     

     




    User Feedback

    Recommended Comments



    1 hour ago, Perfect sense said:

     

    Could you please explain what you mean by "digital is the new analog"? 

     

    / Marcus, www.perfect-sense.se

     

    The slogan of Lindemann is: "DSD is the new Analog"

    not "digital is the new analog".

     

    Matt

    Share this comment


    Link to comment
    Share on other sites

    11 hours ago, Perfect sense said:

    There are design considerations involved here to obtain maximum sound quality basically.

     

    The technical explanation in short:

     

    The DSD-MR processes DSD in its native domain by using a balanced FIR filter, followed by analog filtering stage and balanced tube output stage. Since Lundahl transformers with OFC windings are used for the post-FIR filter analog filtration and I/V conversion, those audio transformers effectively ground the grids of the vacuum tubes in the output stage. This said, introducing a volume control will only deteriorate the audio quality of the DSD-MR. 

     

    You could debate if driving a power amp directly is superior to having a dedicate preamp in your system. Based on experience (my own and others), a well built pre amp on a similar level will most often be beneficial adding to the overall performance of the system. A higher end integrated will of course be an option as well, where there are more options available than ever.

     

    / Marcus, www.perfect-sense.se

     

    I own a simple Schiit Saga preamp with tube output buffer (no gain stage) and a microprocessor-controlled relay-stepped attenuator for volume control. Shouldn't that sound as good as most preamps? B| Personally I like and prefer  the Saga as a preamp in my system. The sound can be slightly tweaked by 'rolling' the dual triode tube. Nevertheless, I recently found that an RME ADI-2 DAC which uses the digital volume control of its AKM DAC chip, sounds 'better' in every respect without a preamp (active or passive). Do I need a better preamp? Do you think digital volume control would deteriorate the audio quality of the DSD-MR? Could rolling the tubes of the DSD-MR improve the sound?

    Share this comment


    Link to comment
    Share on other sites

    1 hour ago, Abtr said:

     

    I own a simple Schiit Saga preamp with tube output buffer (no gain stage) and a microprocessor-controlled relay-stepped attenuator for volume control. Shouldn't that sound as good as most preamps? B| Personally I like and prefer  the Saga as a preamp in my system. The sound can be slightly tweaked by 'rolling' the dual triode tube. Nevertheless, I recently found that an RME ADI-2 DAC which uses the digital volume control of its AKM DAC chip, sounds 'better' in every respect without a preamp (active or passive). Do I need a better preamp? Do you think digital volume control would deteriorate the audio quality of the DSD-MR? Could rolling the tubes of the DSD-MR improve the sound?

    If it works, stop trying to fix it. The digital volume controls on most chips these days are way ahead of years ago. Most pre-amps are just going to remove some clarity and filter the sound, sometimes for the better, sometimes not. A tube pre-amp will almost always add distortion which may sound pleasing to some if it is second order distortion only.

     

    The moral of the story is, if you like what you hear from the RME DAC, love it and be content.

    Share this comment


    Link to comment
    Share on other sites

    16 hours ago, Perfect sense said:

     

    Could you please explain what you mean by "digital is the new analog"? 

     

    / Marcus, www.perfect-sense.se

    Nothing to explain really. As I said it was a claim by Lindemann for their new DSD DACs. I think the exact phrase was "DSD is the new analog".

    Edit: After posting my reply I noticed Matt had already corrected me with the Lindemann slogan, but DSD is digital too. :) The Lindemann DSD DACs can upsample everything up to DSD 256 and the result is supposed to sound analog-like and this point is made in many of the reviews. I have no way of comparing or confirming this but I use the DSD 256 upsampling and am very happy with the sound.

    Share this comment


    Link to comment
    Share on other sites

    23 hours ago, matthias said:

     

    The slogan of Lindemann is: "DSD is the new Analog"

    not "digital is the new analog".

     

    Matt

     

    Well, that's a marketing quote :).  

     

    / Marcus, www.perfect-sense.se

    Share this comment


    Link to comment
    Share on other sites

    Thank you for the write-up.  Seems like a very interesting product.

     

    Have you tried any rock music, like Led Zeppelin or Pearl Jam?  How does it sound? 

     

    Share this comment


    Link to comment
    Share on other sites

    1 minute ago, Lucky Left Hook said:

    Thank you for the write-up.  Seems like a very interesting product.

     

    Have you tried any rock music, like Led Zeppelin or Pearl Jam?  How does it sound? 

     

    Oh yes. Pearl Jam bring my favorite artist, I played nearly every album and it sounded excellent. 

    Share this comment


    Link to comment
    Share on other sites

     

    44 minutes ago, The Computer Audiophile said:

    Oh yes. Pearl Jam bring my favorite artist, I played nearly every album and it sounded excellent. 

     

    Thank you.  Same snap as PCM on rock music, or is DSD softer?

     

    Also, how good is this DAC with less-than-stellar recordings?

     

    Thank you

    Share this comment


    Link to comment
    Share on other sites

    On 3/28/2019 at 4:23 PM, Perfect sense said:

    As biased as I might be representing APL in Scandinavia, this is an amazing product which keeps beating all possible contenders coming through our showroom here in Stockholm from the big names. It strikes a perfect balance in between analytical and musical.

     

    / Marcus, www.perfect-sense.se

    The description and the approach is wonderful. 

    I just hope that some of the magic can be obtained with a much smaller budget, because a circuit based on DSD opens the door for some "simplification".

    Share this comment


    Link to comment
    Share on other sites

    Thanks for the review Chris, it is interesting to hear about what AP has been up to lately, as mentioned by Ted B. he used to be known as a modder,  particularly of CD/SACD players.  I am interested to hear that he has fully committed to the DSD approach now, and I am finding (via a very similar DAC approach using an active, discrete FIR filter (thank you @Miska), followed by passive analog filtering using Lundhall transformers with DSD 256 input) that I also really like what a pure DSD conversion approach can accomplish, even with 44.1/16 source files (oversampled to DSD 256 in software in my case).  While I am certain that every detail of this DAC contributes to its sound quality, I would submit, that from my experience, the biggest factor in the sound quality is the "pure" DSD conversion engine running via discrete components.  For those who balk at the price of this DAC, I would suggest auditioning one of the "pure" conversion style DSD DACs available from other sources.

    Bricasti's M3 for example, or Denafrips, or Holo Audio, and oversampling in software to DSD 128/256.  While HQPlayer is likely the very best option for this, ROON alone offers very good oversampling to DSD as well. 

     

    Share this comment


    Link to comment
    Share on other sites

    Just an fyi for those who are going to Munich.

     

    From APL HiFi's Facebook page:

     

    "HIGH END 2019 Munich is only one month away and we are excited to be exhibiting alongside the stellar Davis Acoustics & Esprit Audio this year!

     

    Come enjoy our sound in Atrium 4.2, Room 205, we look forward to seeing you all there!"

     

    Joel

     

     

    Share this comment


    Link to comment
    Share on other sites

    Many, many years ago, I had an Alex-modified Denon.  He simply used the transport and the rest was some of the most amazing point-to-point wiring I have ever seen (which he did himself).  It sounded great but became outdated when new formats were released.

     

    I always found Alex to be interested in sound first and foremost.  I had the Denon modified more than once and on one occasion he shipped the unit without payment.  That is the kind of guy he is.  And, of course, he is a genius too.  

     

    At some point, he wanted to see what was possible for CD playback in a cost-no-object design.  Seems like he has found out.  Congratulations, Alex.   

    Share this comment


    Link to comment
    Share on other sites

    "DSD is the new Analog" ? ... ummm, recordings hold analogue information, encoded by digital in various formats - the big trick is to get the playback chain clean enough so that disturbing, 'digital' anomalies are not audible. Which can be done in myriads of ways, including converting to DSD, if that happens to allow the hardware to do its job more competently.

     

    That highly modified Denon is the clue - it's manufacturing shortcuts, lack of attention to detail, that kills digital SQ - take some care on getting the path just right, and "analogue" sound will flood the room.

    Share this comment


    Link to comment
    Share on other sites

    On 3/28/2019 at 4:28 PM, mrvco said:

     

    A flagship or halo product should serve a valuable purpose, bringing attention to a brand and providing trickle-down technology and manufacturing expertise that can be executed in more cost-effective products... rather than simply enabling conspicuous consumption for status seekers.

    I think that it's possible to have several purposes. There's also the consideration of making a total statement, SOTA, product. And (based exclusively on the review) it approaches that. How much money do (what some consider) the best speakers ever made? What is the price of the best sounding amplifier? I don't know all the parts costs here, - but at least in the past, - Alex's "cost-to-build" parts were more than 1/2 of the retail price: which is both unheard of, and which no one pays anyway.

    Share this comment


    Link to comment
    Share on other sites

    @The Computer Audiophile what formats is it possible to transfer via the DTR connection between streamer and DAC can it do native DSD? Cant find anything on the net about it.

    Share this comment


    Link to comment
    Share on other sites

    20 hours ago, octaviars said:

    @The Computer Audiophile what formats is it possible to transfer via the DTR connection between streamer and DAC can it do native DSD? Cant find anything on the net about it.

    Good question. I'm not 100% sure. 

     

    @joelha Do you know this one?

    Share this comment


    Link to comment
    Share on other sites

    While I understand that octaviars' question may have already been answered by Alex at APL, here's the answer I received from Alex:

     

    "The DTR connection supports up to 384kHz/32bit PCM and up to DSD256 in NativeDSD format. DoP64 and DoP128 are also possible."

     

    "However, if someone has a compatible DAC with USB Class 2 input, it is possible to stream up to DSD512 in NativeDSD format (not DoP) from the USB DAC connection of the streamer."

     

    Joel

    Share this comment


    Link to comment
    Share on other sites

    32 minutes ago, joelha said:

    While I understand that octaviars' question may have already been answered by Alex at APL, here's the answer I received from Alex:

     

    "The DTR connection supports up to 384kHz/32bit PCM and up to DSD256 in NativeDSD format. DoP64 and DoP128 are also possible."

     

    "However, if someone has a compatible DAC with USB Class 2 input, it is possible to stream up to DSD512 in NativeDSD format (not DoP) from the USB DAC connection of the streamer."

     

    Joel

    Thanks Joel!

    Share this comment


    Link to comment
    Share on other sites

    12 hours ago, joelha said:

    While I understand that octaviars' question may have already been answered by Alex at APL, here's the answer I received from Alex:

     

    Yes that is correct 👍 but thanks for your time to check this.

    Share this comment


    Link to comment
    Share on other sites

    On 3/28/2019 at 7:43 PM, The Computer Audiophile said:

    Yeah, I certainly hear you about the price. The best of anything isn't cheap or anywhere relative to those of a lesser quality. The koenigsegg Jesko is $3,000,000 and it's sold out. Certainly not millions of dollars better than many other cars on a linear scale, but life doesn't work this way. I wish it did. 

     

    This is probably the most expensive DAC I've ever reviewed. If I had the money I'd certainly purchase it. I don't see the APL products as priced insanely for no reason like some other products. This stuff is hand built one at a time using the best components, and on a tiny scale. 

     

    Hello Chris,

     

    Thank you first for all your reviews it helps a lot when thinking of a system upgrade !

    After having read reviews, I am thinking of getting EMM Labs DV2 (with EMM preamp) or APL DSD MR DAC (with APL streamer and preamp).

    You reviewd both of them at different times with a very positive feedback for each,

    And I will listen to both of them, but at a different time and in a different place which makes the choice very difficult.

    => What would be your advice ?

     

    => And then I which mono amplifier would you recommend for verity audio Sarrastro speakers ?

    linked to the DAC and preamp mentionned above ?

     

    Thank you very much in advance for your answer ,

     

    Best regards and congratulations for your publications that are awesome !

    Guillaume

    Share this comment


    Link to comment
    Share on other sites




    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now




×
×
  • Create New...