Jump to content
  • The Computer Audiophile
    The Computer Audiophile

    The Definitive Guide To Roon Optimized Core Kit (ROCK)

    Who: Roon Labs, developers of Roon software.

    What: Roon Optimized Core Kit (ROCK), a custom linux operating system that runs Roon core and works like an appliance. 

    When: Available now.

    Where: Directly as a free software download from Roon.

    Why: It's the best way to run Roon (my opinion).

    How: This guide will attempt to show you how to setup ROCK. The guide will be updated as needed.

     

    Note: Before continuing, I must applaud Roon Labs for its detailed documentation found here (LINK). When I first installed ROCK I relied on this documentation in addition to the Roon community. The CA ROCK guide is meant to add value to what is already available from Roon, condense some of the most important information, and to clear up many of the questions I ran into while setting up my first few ROCKs.

     

    Let me dig a little deeper into the what and why. Until now, Roon needed to be installed on Windows, macOS, or a NAS (unless one was a geek capable of setting up a Linux machine etc...). Windows and macOS require a full blown computer, keyboard, monitor, mouse, OS updates, OS issues, hardware issues, optimization questions, etc... Installing Roon directly on a NAS seemed like the best of all worlds when it first came out, but some of us ran into issues due to NAS hardware limitations. Plus, the cost of NAS units jumps very quickly into the thousands of dollars, without any hard drives, when the NASes feature fast processors and a good amount of RAM .

     

    In my system, I've run Roon on all supported platforms. I built a custom Windows 10 computer with a Xeon processor, an NVMe SSD, a mountain of RAM, a RAID card, and several terabytes of storage. This was to be my Roon core computer that sat in my utility room away from my audio system. It just served music over the network. Not too long after I built the PC, I started having issues that I've yet to solve. The PC must be restarted daily for Roon, JRiver, or web browsers to work. I've also installed Roon on a number of NAS units, and been disappointed by the slow speed when browsing and searching my library (300,000+ tracks). The point of my story is to point out that problems will arise with a general purpose computer and a better solution is desirable. 

     

    Roon Optimized Core Kit (ROCK) is Roon Lab's attempt to solve these issues. Roon Labs has pre-certified several hardware options from which users can chose and has created a custom version of Linux optimized especially for this hardware and to run Roon only. Not only this, Roon Labs has created an extremely simple installation wizard for non-geek users. 

     

    I've been running ROCK and found it truly works like an appliance. All updates are done through the Roon interface, even updates to the custom operating system. The user doesn't have to know anything other than to click the "update" button.

     

    Note: ROCK isn't for those looking to filter or resample audio by routing it through HQPlayer. Only the Roon OS can be installed on a ROCK, not the required HQPlayer app. Fortunately, Roon now features many DSP options natively and these will run on the core i7 NUC.

     

     

     

    Architecture

     

    To understand where the ROCK fits into a system, we must first look at the Roon architecture. Roon requires three components. 

     

    1. Core / Server
    2. Remote
    3. End Point

     

     

    All three components can be on a single computer, two computers, or even split into thee computers or audio devices. The Core is Roon's brain. This is the piece that runs on ROCK. Roon remote can be run on a computer, iOS, or Android device. The end point can be a USB DAC directly connected to any device running Roon software, or a network connected device running Roon software. 

    Roon architecture with ROCK in the system can also be configured a number of ways, from simple to complex. Here are a few examples.

     

    A. ROCK running as the core with all music stored on the ROCK's internal 2.5 inch hard drive (a USB drive connected for backup), Roon Remote running on an iPad, and audio sent to a RoonReady DAC over Ethernet. 


    B. ROCK running as the core with all music stored on the ROCK's internal 2.5 inch hard drive (a USB drive connected for backup), Roon Remote running on an iPad, and audio sent to a directly attached USB or HDMI audio device.


    C. ROCK running as the core, music stored on a NAS, Roon Remote running an iPad, and audio sent to RoonReady network devices. This is how I use ROCK and believe it's the best way, given my storage requirements. 

     

     

    I will continue to use my situation as an example system. There are many other ways to do things given peoples' different needs and requirements. I have 300,000+ tracks consuming 11 terabytes of disk space on a Synology DS1812 NAS. This NAS has a 2.13 GHz Intel Atom processor, 1 GB of RAM, and 8 spinning 2 terabyte hard drives. It's an old NAS using slow hardware. However, running Roon core on ROCK has made this hardware a moot point. All the work is done by the ROCK while the NAS just serves up files. I use iOS and Android remote devices, as well as my 27" 5K iMac as a remote while I'm working at my desk. The Roon core / database files are backed up to the NAS, and the entire NAS is backed up to the Amazon cloud. Amazon offers unlimited cloud storage for $59 per year in the US. I have a 1 Gbps up/down internet connection over which my data is automatically synchronized. 
     

     

    Hardware

     

    Note: For those who don't want anything to do with this aspect of ROCK, Roon Labs offers a product called Nucleus. It's identical to the systems below, but is sold by a dealer and comes ready to use. The price will be around $2,000 for the i7 model. 

    Roon Labs has pre-selected two Intel NUC based systems on which people should install ROCK. 

     

    1. The i3 based NUC7i3BNH NUC, with 4 GB of RAM and a 64 GB M.2 SSD. This system is recommended for small to medium libraries (under 12,000 albums). The price of this system should be around $400. 

     

    2. The i7 based NUC7i7BNH NUC with 8 GB of RAM and a 64 GB M.2 SSD. This system is recommend for large libraries and those using DSP features. The price of this system should be just over $600

     


    I selected the i7 based NUC7i7BNH NUC because I want the freedom to use Roon and all its features in any way I can. I selected an 8 GB module of single rank RAM, over the 2x4 GB modules suggested by Roon because I want to leave the second memory slot available, should I want to repurpose this hardware in the future. Roon Labs says it will not use more than 8 GB of RAM and all additional RAM will be a waste. I selected a Samsung SSD 960 EVO NVMe M.2 250GB disk because I've had great luck with these drives. The 250 GB is larger than I need, but it's the smallest size in this model. Samsung also offers a Pro model for an additional $200, but I don't believe the slightly improved sequential read / write speed of the Pro model will have an effect on ROCK. If a users wants to store music on an internal drive, s/he will need to purchase a 2.5 inch SSD or HDD. The M.2 drive is only for the OS and Roon, while the 2.5" drive is for music. A USB drive is also possible for music storage. 

     

    Note: This NUC supports Intel Optane memory. However, ROCK doesn't support this yet and it's doubtful it ever will. Don't purchase an Optane module for ROCK, it's a waste of money.

     

    Here are links to what I purchased. The total price was $660.
     

    Intel NUC7i7BNH NUC - LINK

     

    Crucial CT8G4SFS8213 8 GB RAM - LINK

     

    Samsung MZ-V6E250BW SSD 960 EVO NVMe M.2 250GB SSD - LINK

     

     

    ROCK 0001

     

     

     

     

     

    Installation

     

    Intel NUC computers ship without disk or RAM, and require a keyboard, monitor, and mouse for installation of ROCK. In the image below you can see the Samsung SSD and Crucial RAM installed in the NUC. The installation requires a screw driver and common sense. No technical skills required. Once the hardware is assembled, connect the peripherals and power it up to make sure it's working. There's no operating system on the disk, so it won't boot to a usable screen, but the hardware should boot.

     

     

     

    Roon ROCK 0002 Roon ROCK 0003

     

     

     

     

    Here is an ultrashort time-lapse of me installing the hardware. It's really this simple.

     

     


     

     

     

     

    BIOS

     

    According to Roon Labs, the both the i3 and i7 NUCs must be at BIOS level 46 or higher. My NUCs shipped with version 0042. Updating the BIOS is fairly easy. Here are instructions.

     

    Go to Intel's Drivers & Software download site for the purchase NUC and select the latest BIOS to download. Assuming a purchase of the NUC7i7BNH NUC, here is a link to the download page - LINK.  If you want a quick download of BIOS version 0046, here's a direct download link from CA's server - LINK. I compared the BIOS versions for both the i3 and i7 and the files match perfectly. I haven't tried this download on the i3, so use at your own risk.

     

    Place the BN0046.bio file on a USB stick and place the stick into the NUC. When booting the NUC hit the F7 key. This will load the BIOS update screen. You will likely see a couple other files on the USB stick, but those are of no concern. Using the keyboard, select the BN0046.bio file and hit Enter when asked if you wish to update the BIOS. Here are some screenshots of the process.

     

     

    Roon ROCK 0004 Roon ROCK 0005 Roon ROCK 0006

     

     

     

     

    After updating the BIOS, there are a couple Roon Labs recommended settings to change. When booting your NUC, hit F2 to enter the BIOS setup. Once the BIOS configuration page loads, hit F9 to load the defaults. Then, click the Advanced tab, followed by the Boot tab. Uncheck UEFI Boot. Also set the M.2 SSD to first in the boot priority. Select the Boot Configuration tab and adjust the following options, enable Boot USB Devices First, enable Suppress Alert Messages At Boot, disable network/ LAN / pixie boot. 

     

     

    Roon ROCK 0007 Roon ROCK 0008


     

     

     

     

     

    ROCK

     

    Note: The video near the bottom of the page shows the next few steps in detail.

     

    Once the BIOS is updated to at least version 0046, it's time to install ROCK. Go to the Roon Labs ROCK Install Guide page, scroll to the download section and find the link to the factory reset disk image. If Roon Labs doesn't change the address, this link will download the image directly - LINK

     

    Users on a Mac will be able to uncompress this downloaded file, producing the image file named roonbox-linuxx64-nuc3-usb-factoryreset.img. Make sure the file extension is IMG. Users on a PC will not be able to uncompress this file and will need to download a tool such as 7-zip. Here is a link - LINK. Once installed, 7-Zip will uncompress the file, revealing the IMG image. 

     

    With the image file ready, you need to write this file to a USB stick. Copying the file to the USB stick will not work, it must be written using a image flashing tool. The tool I've been using for a while is called Etcher. It can be downloaded for Mac and Windows here - LINK. Using Etcher, select the IMG file, select the USB stick, then select Flash. Once this is complete, you are ready to install ROCK on the NUC. 

     

    Place the newly flashed USB stick in the NUC and boot it up. If it doesn't boot from the USB stick, restart it and hit the F10 key. This will enable you to manually select the USB stick from which to boot. Once the ROCK install screen appears, the rest is simple. Follow the wizard that asks if you'd like to install ROCK, to select an install disk, and to confirm this is what you want to do. Several seconds later, ROCK installation will complete. Remove the USB stick and reboot the NUC. Once it boots, you will see a Roon screen displaying the IP address of the ROCK. This IP address should be entered in a web browser to complete ROCK setup. 

     

     

    roon rock install 0001 roon rock install 0002 roon rock install 0003 roon rock install 0004 roon rock install 0005

     

     

     

    Note: One can also go into the Roon app and click the button to Configure Roon OS devices, then select the ROCK. The end result is the same. The web interface is brought up.

     

     

    Here is an ultrashort video of me updating the BIOS and installing ROCK. It's really this simple. (Don't mind the dirty, messy, and dusty utility room. You should see the rest of it!).

     

     

     

     

     

     

    Configuration

     

    Note: The video near the bottom of the page shows the next few steps in detail.

     

    After ROCK is installed and you go to the NUC's IP address in a web browser, you will see big red letters saying "Missing Codecs." This is normal due to patented codecs. Roon Labs would have to pass on a licensing fee to the customer for these to be installed with ROCK. Instead, these can be downloaded by the end user at no charge. 

     

    Roon Labs recommends users download the codec file from this website - LINK. However, I've already downloaded it, extracted the only needed file, and made it available directly from the CA server. If you want to download the appropriate file from the original website recommended by Roon Labs, you will need to install a program such as The Unarchiver (LINK) on macOS or 7-Zip on Windows, in order to unzip the file. Either way, you need the file and it makes no difference to me where you get it from. Here are links. 

     

     

    Complete package that needs to be uncompressed with one of the apps above - LINK

     

    or 

     

    The only file you need (it's a zip file that can be uncompressed by any computer) - LINK

     


    Assuming you downloaded the file from the CA server and uncompressed the zip file, you're left with a single file named ffmpeg. This file needs to be copied to the ROCK's Codecs folder. Connect to ROCK the same way you would connect to any other folder on your network (not with a web browser). On a Mac, ROCK appears in Finder under the Shared section. If asked for a username and password, connect as guest without a password. Copy ffmpeg to the Codecs folder. 

     

    Once the ffmpeg file is copied to ROCK, reboot the ROCK computer by going to its webpage, clicking the little red power icon in the upper right corner, and selecting Reboot. If all goes well, when it comes back up, it will say OK under Roon Server Software. 

     

     

    Roon ROCK 0009 Roon ROCK 0010

     

     

     

     

     

    All other configuration / setup is done via the Roon app.

     

    Users who have previous installation of Roon and want to transfer playlists, edits, play history, tags, settings, etc... may want to migrate their existing databases to the new ROCK. This is done by backing up the current Roon database and restoring it to the ROCK from the backup. Roon has an entire page on this process, located here - LINK.

     

    Note: When moving to the ROCK you may be asked to unauthorize one Roon server. Just click the unauthorized button next to your existing Roon server, so the ROCK can use your license. After switching to the ROCK, you may have a strange issue where a Roon remote (iOS or Android for example) is still connected to the old database, even though it has been unauthorized. It will play music and cause the audio end points to drop off the ROCK version of Roon. To stop this issue from happening, I uninstalled Roon from the computer that was running the database prior to using ROCK, then reinstalled Roon. Upon reinstallation I elected to use ROCK as the core, thus not creating the database on the local computer. You can also manually remove the core database folders, but uninstalling and reinstalling is easiest. Note when uninstalling on Windows, select the box to remove the database and settings. When uninstalling on Mac, navigate to /Library and remove the Roon folder. 

     

    Because I didn't have much custom data in the database and all my playlists are on Tidal, I elected to start with a fresh database on ROCK. Launching Roon on my iMac desktop, Roon asked me to select a core. I selected the ROCK, and completed the setup by adding a music file location and signing into Tidal. Once this was done, Roon scanned music folder of 300,000+ tracks and analyzed the music files. the initial scan completed overnight while the analysis took much longer. it really doesn't matter because music can be played while wither processing is going on. 

     

    I created a little video of me going through the ROCK file downloads and initial setup through the web and Roon interfaces. Nothing special, just a fairly quick run through of what the process looks like. 

     

     

     

     

     

     

     

     

    Wrap Up 

     

    Roon Optimized Core Kit (ROCK) is my preferred way to run Roon on my network. It may not be for everyone, but I believe it's for many people. ROCK runs like an appliance. It doesn't require technical knowledge beyond the basic ability to click an update button. The installation requires a bit more knowledge, but someone capable of following instructions will have no problem setting it up. On the other hand, those uninterested in setting up a ROCK themselves can purchase the Roon Nucleus. The Nucleus contains the exact same internal hardware and software as that mentioned above, but comes in a nice looking chassis. The Nucleus will be sold at dealers for around $1,000+ more than purchasing the hardware and installing the software yourself. If you have any questions about how to best run Roon or what hardware to purchase for a Roon installation, it's a no brainer that a ROCK (or Nucleus) can and will get the job done as good or better than any other option. 

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     




    User Feedback

    Recommended Comments



    How does it sound?  Especially compared to a sonicTrasnporter, which, regrettably, I literally bought TODAY :(

    Share this comment


    Link to comment
    Share on other sites

    42 minutes ago, MarkS said:

    How does it sound?  Especially compared to a sonicTrasnporter, which, regrettably, I literally bought TODAY :(

     

    Don't worry about it mark. I'm sure the sonicTransporter will work great. Plus, you'll get great support from SGC. 

     

    I don't notice a sonic difference between the ROCK or my custom NAS. It's all good.

    Share this comment


    Link to comment
    Share on other sites

    The premium for a pre-built system is ridiculous.  I hope your article empowers people to do it themselves.

    Share this comment


    Link to comment
    Share on other sites

    The Intel NUC has a fan, whereas the Nucleus will be fanless. How much noise does your NUCi7 generate? Is it quiet enough to place in your listening room, or have you put it in a cupboard somewhere? Thanks.

    Share this comment


    Link to comment
    Share on other sites

    3 hours ago, MarkS said:

    How does it sound?  Especially compared to a sonicTrasnporter, which, regrettably, I literally bought TODAY :(

     

    The SonicTransporter gives you a lot more - support for different platforms as well as support from the vendor themselves. The price difference is relatively minimal for all of the added flexibility and capability you get.

    Share this comment


    Link to comment
    Share on other sites

    Nice guide. Does ROCK support uninteruptable power supplies, like the ones from APC?

    Share this comment


    Link to comment
    Share on other sites

    hi

    how dows rock cope with 300,000 tracks as i roughly have the same.

    Share this comment


    Link to comment
    Share on other sites

    4 hours ago, gomle69 said:

    Nice guide. Does ROCK support uninteruptable power supplies, like the ones from APC?

     

    As far as I know, it only supports them like any other "dumb" device. meaning, you can't connect a USB cable to an APC and have it shutdown gracefully etc...

     

    Share this comment


    Link to comment
    Share on other sites

    7 hours ago, gcoupe said:

    The Intel NUC has a fan, whereas the Nucleus will be fanless. How much noise does your NUCi7 generate? Is it quiet enough to place in your listening room, or have you put it in a cupboard somewhere? Thanks.

     

    Very good point. The ROCK has a fan. Right now it's really noisy because it's analyzing 300,000+ tracks for my newest installation. when it's running regular, it's pretty quiet. i can't say for sure if nobody will hear it in a listening room, but I'd be comfortable with it sitting in my room. 

    Share this comment


    Link to comment
    Share on other sites

    30 minutes ago, gary1 said:

    hi

    how dows rock cope with 300,000 tracks as i roughly have the same.

     

    No problems at all with 312,505 tracks. Here's a little video. Keep in mind that in the ROCK is using all four cores to analyze the entire collection as I recorded this video. Its resources are taxed heavily during this process. 

     

     

    Share this comment


    Link to comment
    Share on other sites

    Can you install this on a mac via bootcamp for example?

    Share this comment


    Link to comment
    Share on other sites

    9 hours ago, rickca said:

    The premium for a pre-built system is ridiculous.  I hope your article empowers people to do it themselves.

     

    Hi Rick - It certainly is a steep price jump, but let me give you a little background. Since Roon was released audio dealers have been pushing the Roon Labs team to release hardware, so it can be sold by dealers. For quite a while Roon Labs pushed back because they were in the hardware business when they first started Sooloos (before Meridian purchased Sooloos), and they'd didn't really want to get back into that business. Roon Labs is a software company. However, more dealers kept the pressure on and Roon Labs saw an opportunity to increase software sales if the company offered a limited amount of hardware. 

     

    I don't believe Roon Labs is making much money off this Nucleus hardware, considering the cost of parts, chassis, and labor and the dealer margin. The money is made somewhere, just not by Roon Labs. 

     

    That said, the final cost is much lower in terms of the multiplier, compared to the rest of HiFi. Given that I spent $660 without a chassis (yes retail pricing), using a common multiplier of 5X, the price should be $3,300 without a custom fanless chassis. 

     

    I don't want it to seem like I am defending the price or the typical multiplier or anything like that, I just want to provide some additional info. Heck, I just told people how to save over $1,000 :~)

     

    P.S. Other companies already sell competing products, such as Small Green Computer and ELAC. SGC has a few products at many price ranged - https://www.smallgreencomputer.com/collections/audio-server

    Share this comment


    Link to comment
    Share on other sites

    13 minutes ago, The Computer Audiophile said:

    That said, the final cost is much lower in terms of the multiplier, compared to the rest of HiFi.

    The added value of the pre-built Nucleus is also way lower than the typical audio product.  If Roon isn't making a lot of profit, the dealers are.

    Share this comment


    Link to comment
    Share on other sites

    Just now, rickca said:

    The added value of the pre-built Nucleus is also way lower than the typical audio product.  If Roon isn't making a lot of profit, the dealers are.

     

    If I had to guess, and this is only a guess, I'd say the dealers are adding 40% to the cost. 

     

    Share this comment


    Link to comment
    Share on other sites

    Well, it all depends where you are coming from and if you have any inclination to do it yourself. 

    Not everyone has easy and cheap access to all the parts. The pre built,is then a lot more attractive.

    Personally, I'm capable of building it, but may prefer to spend the money: a)to save time and hassle; and b) have someone responsible. just on the small chance I build it something doesn't work.

    Share this comment


    Link to comment
    Share on other sites

    14 minutes ago, firedog said:

    Well, it all depends where you are coming from and if you have any inclination to do it yourself. 

    Not everyone has easy and cheap access to all the parts. The pre built,is then a lot more attractive.

    Personally, I'm capable of building it, but may prefer to spend the money: a)to save time and hassle; and b) have someone responsible. just on the small chance I build it something doesn't work.

     

    I'm with you. As used car salesmen say, "There's an ass for every seat." Meaning, the Nucleus is a great product for many people. One either spends his own time or spends his own money. Doesn't matter to me which one. 

    Share this comment


    Link to comment
    Share on other sites

    13 minutes ago, firedog said:

    Well, it all depends where you are coming from and if you have any inclination to do it yourself. 

    Sure, I agree.  The biggest risks of building your own system are typically selecting the parts (potential compatibility issues), software compatibility (drivers) and sizing (can the system deliver the desired performance).  

     

    These risks are really minimized in this case, because Roon has tested the whole thing for you.   Of course, you can always get a DOA part.

     

     

     

     

     

    Share this comment


    Link to comment
    Share on other sites

    11 hours ago, MarkS said:

    How does it sound?  Especially compared to a sonicTrasnporter, which, regrettably, I literally bought TODAY :(

    Don't worry. I just read the whole article and have no desire to replace my ST. It is already a fan-less appliance that works every day, every time. 

    You won't regret it....

    Share this comment


    Link to comment
    Share on other sites

    Chris,

     

    The Samsung SSD you've used appears to have a differing end connection when compared to the Transcend SSD recommended in the ROON ROCK article.  Yours has two "fingers" while the Transcend has three (shown below).  I'm a complete novice on this subject so just wanted to confirm either will seat into the NUC.  Planning to install to a ROCk once the Devialet AIR inclusion is announced...assumed to be next week or the following.

    Also note your choice is blazingly fast...is this a valuable upgrade from the Transcend?

    Thanks for your guide...very helpful.

    59318e91247e7_ScreenShot2017-06-02at9_12_10AM.thumb.png.6e6aea2dc1681da31a01b0bc75a93ef2.png

    Share this comment


    Link to comment
    Share on other sites

    Here is a little more information about the differences.

     

    From Wikipedia:

     

    PCB of an M.2 module provides a 75-position edge connector; depending on the type of module, certain pin positions are removed to present one or more keying notches. Host-side M.2 connectors (sockets) may populate one or more mating key positions, determining the type of modules accepted by the host; as of April 2014, host-side connectors are available with only one mating key position populated (either B or M).[4][11][16] Furthermore, M.2 sockets keyed for SATA or two PCI Express lanes (PCIe ×2) are referred to as "socket 2 configuration" or "socket 2", while the sockets keyed for four PCI Express lanes (PCIe ×4) are referred to as "socket 3 configuration" or "socket 3".[1]:15[17]

    For example, M.2 modules with two notches in B and M positions use up to two PCI Express lanes and provide broader compatibility at the same time, while the M.2 modules with only one notch in the M position use up to four PCI Express lanes; both examples may also provide SATA storage devices. Similar keying applies to M.2 modules that utilize provided USB 3.0 connectivity.[4][16][18]

    Various types of M.2 devices are denoted using the "WWLL-HH-K-K" or "WWLL-HH-K" naming schemes, in which "WW" and "LL" specify the module width and length in millimeters, respectively. The "HH" part specifies, in an encoded form, whether a module is single- or double-sided, and the maximum allowed thickness of mounted components; possible values are listed in the right table above. Module keying is specified by the "K-K" part, in an encoded form using the key IDs from the left table above; it can also be specified as "K" only, if a module has only one keying notch.[4][11]

    Beside socketed modules, the M.2 standard also includes the option for having permanently soldered single-sided modules.[11]

    M.2 sockets with an "E" slot support Dual-Band Wireless LAN/Bluetooth cards (2230 or 1216).[19]

    M2_Edge_Connector_Keying.svg.png

    Share this comment


    Link to comment
    Share on other sites

    2 hours ago, The Computer Audiophile said:

     

    No problems at all with 312,505 tracks. Here's a little video. Keep in mind that in the ROCK is using all four cores to analyze the entire collection as I recorded this video. Its resources are taxed heavily during this process. 

     

     

    thank you for the video,after analyze as finnished would the i7 nuc rock not be taxed as much?

    Share this comment


    Link to comment
    Share on other sites

    Just now, gary1 said:

    thank you for the video,after analyze as finnished would the i7 nuc rock not be taxed as much?

     

    Correct. The i7 ROCK won't be taxed much at all I suspect.

    Share this comment


    Link to comment
    Share on other sites

    32 minutes ago, The Computer Audiophile said:

    Here is a little more information about the differences.

     

    From Wikipedia:

     

    PCB of an M.2 module provides a 75-position edge connector; depending on the type of module, certain pin positions are removed to present one or more keying notches. Host-side M.2 connectors (sockets) may populate one or more mating key positions, determining the type of modules accepted by the host; as of April 2014, host-side connectors are available with only one mating key position populated (either B or M).[4][11][16] Furthermore, M.2 sockets keyed for SATA or two PCI Express lanes (PCIe ×2) are referred to as "socket 2 configuration" or "socket 2", while the sockets keyed for four PCI Express lanes (PCIe ×4) are referred to as "socket 3 configuration" or "socket 3".[1]:15[17]

    For example, M.2 modules with two notches in B and M positions use up to two PCI Express lanes and provide broader compatibility at the same time, while the M.2 modules with only one notch in the M position use up to four PCI Express lanes; both examples may also provide SATA storage devices. Similar keying applies to M.2 modules that utilize provided USB 3.0 connectivity.[4][16][18]

    Various types of M.2 devices are denoted using the "WWLL-HH-K-K" or "WWLL-HH-K" naming schemes, in which "WW" and "LL" specify the module width and length in millimeters, respectively. The "HH" part specifies, in an encoded form, whether a module is single- or double-sided, and the maximum allowed thickness of mounted components; possible values are listed in the right table above. Module keying is specified by the "K-K" part, in an encoded form using the key IDs from the left table above; it can also be specified as "K" only, if a module has only one keying notch.[4][11]

    Beside socketed modules, the M.2 standard also includes the option for having permanently soldered single-sided modules.[11]

    M.2 sockets with an "E" slot support Dual-Band Wireless LAN/Bluetooth cards (2230 or 1216).[19]

    M2_Edge_Connector_Keying.svg.png

    Very helpful, thanks again...is there any value in the higher speeds of the SSD you've chosen?

     

    Screen Shot 2017-06-02 at 9.12.10 AM.png

    Share this comment


    Link to comment
    Share on other sites




    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now




×
×
  • Create New...